(Jan-2024) DES-4122 Exam Dumps Contains FREE Real Quesions from the Actual Exam
Free Test Engine Verified By DCS-IE Certified Experts
NEW QUESTION # 30
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?
- A. Dispatches technical support from Dell for all Dell servers, storage, and networking devices
- B. Proactive, predictive, and automated support technology to enable faster resolution and reporting
- C. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
- D. Includes onsite monitoring and automated collection of system state information
Answer: D
NEW QUESTION # 31
You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.
- A. A technician wants to
- B. Send us your suggestion for this simulation task.
Answer: B
NEW QUESTION # 32
A Dell EMC PowerEdge server logs the following CPU Machine Check error CPU1 IERR What action might solve the problem?
- A. Remove flea power
- B. Update the Intel driver
- C. Reseat the IDSDM
- D. Swap the PERC controller
Answer: B
NEW QUESTION # 33
What is a characteristic of out-of-band management?
- A. Agent based
- B. Dedicated device
- C. Dependent upon OS
- D. Less secure
Answer: B
NEW QUESTION # 34
What is the correct order of steps taken during the BIOS/UEFI Recovery process?
Answer:
Explanation:
NEW QUESTION # 35
What is a key feature introduced in OpenManage Mobile v2.0?
- A. Access iDRAC remotely
- B. Access a Virtual Console (VNC over SSH) securely
- C. Access SupportAssist reports
- D. Access servers remotely through OME
Answer: C
NEW QUESTION # 36
Which processor configuration is used by the Dell EMC PowerEdge R740 server?
- A. 4 socket AMD
- B. 4 socket Intel
- C. 2 socket Intel
- D. 2 socket AMD
Answer: C
NEW QUESTION # 37
What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?
- A. Ethernet cable
- B. NFC connection
- C. Wi-Fi connection
- D. Micro-AB USB
Answer: D
NEW QUESTION # 38
Match each RAID level to its characteristic.
Answer:
Explanation:
NEW QUESTION # 39
A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.
- A. A technician wants to
- B. Send us your suggestion for this simulation task.
Answer: B
NEW QUESTION # 40
An engineer needs to install an additional PSU on an existing, single PSU Dell EMC PowerEdge R740. They complete the initial installation and cabling procedures. They connect an AC cable and the power distribution unit produces normal AC output. The engineer checks power management and sees that the new PSU is in the Failed state.
What task should be completed to troubleshoot this issue?
- A. Confirm the System Input Power CAP is not set to Low
- B. Set the PSU AC redundancy to 1+0
- C. Set the PSU AC redundancy to 1+1
- D. Verify the new PSU is the same type and wattage rating
Answer: D
NEW QUESTION # 41
A technician working with a Dell EMC PowerEdge 1 take corrective action?
- A. Check the LCC Log
Check PSU LED
Reseat the PSU - B. Check the System Event Log
Check PSU LED
Reseat the PSU - C. Check the LCC Log
Check PSU LED
Reseat the CPU - D. Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC
Answer: D
NEW QUESTION # 42
A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?
- A. The license cannot be upgraded on a single PSU system
- B. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down
- C. The license cannot be upgraded because the user will not allow the server to be powered on
- D. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
Answer: A
NEW QUESTION # 43
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC9 default credentials are root/calvin orderable only
- B. iDRAC8 default credentials are customer orderable
- C. iDRAC9 offers HTML5 based GUI
- D. iDRAC8 offers HTML5 based GUI
Answer: D
NEW QUESTION # 44
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- B. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
- C. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
- D. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
Answer: D
NEW QUESTION # 45
What is the Open Compute Project (OCP) card used for in a Dell EMC PowerEdge server?
- A. Provide a hot-swap component
- B. Flexibility to choose interconnects
- C. Consume a PCIe slot
- D. Fixed networking card
Answer: D
NEW QUESTION # 46
What happened on April 30, 2019?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 47
When does a customer require the Service Tag of the Dell EMC PowerEdge server?
- A. First time accessing the BIOS
- B. First time logging in to iDRAC
- C. Activating the OS
- D. Obtaining warranty information
Answer: A
NEW QUESTION # 48
A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: D
NEW QUESTION # 49
What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?
- A. Simplify
Fee-based license Agent-free Management Secure - B. Simplify
Basic Hardware Element Management
Agent-free Management
Fee-based license - C. Simplify
Unify
Automate
Secure - D. Automate
Basic Hardware Element Management
Agent-free Management
Simple and effective
Answer: A
NEW QUESTION # 50
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:
The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?
- A. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2
- B. Hot-plug power supply, 750 W - qty 1
- C. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
- D. Hot-plug power supply, 1100W - qty 1
Answer: A
NEW QUESTION # 51
What can be done using in-band management?
- A. Firmware and driver updates
- B. Agentless discovery
- C. Network bandwidth optimization
- D. Remote access
Answer: D
NEW QUESTION # 52
What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?
- A. USB Flash drive
- B. vFlash SD card
- C. IDSDM SD card
- D. Network share
Answer: D
NEW QUESTION # 53
......
Use Real EMC Achieve the DES-4122 Dumps - 100% Exam Passing Guarantee: https://www.realvalidexam.com/DES-4122-real-exam-dumps.html
Verified DES-4122 Q&As - Pass Guarantee DES-4122 Exam Dumps: https://drive.google.com/open?id=1SDcGAHCxq4aVQBZWwsHUvk5anM0K9BM0
