Authentic NS0-162 Dumps With 100% Passing Rate Practice Tests Dumps
Network Appliance NS0-162 Real Exam Questions Guaranteed Updated Dump from RealValidExam
NetApp NS0-162 Exam Topics:
| Section | Objectives |
|---|---|
| Data Protection | -Describe how to use ONTAP data protection solutions. -Describe how to use SnapMirror. -Identify MetroCluster concepts. |
| Networking | -Describe how to use network components. -Demonstrate knowledge of how to troubleshoot network components. |
| Logical Storage | -Describe how to use logical storage features. -Describe NetApp storage efficiency features. -Describe NetApp ONTAP Data Fabric solutions. |
| Core ONTAP | -Describe ONTAP system management. -Describe high availability concepts. -Describe how to manage Storage Virtual Machines (SVM). |
| Storage Platforms | -Describe knowledge of physical storage systems. -Describe software-defined on-premises or cloud storage systems. -Describe how to upgrade or scale ONTAP clusters. |
| Security | -Describe protocol security. -Describe security hardening. -Describe inflight or at rest encryption. -Identify SnapLock concepts. |
NEW QUESTION 36
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the failover-policy option
- C. the subnet-name option
- D. the auto-revert option
Answer: A
NEW QUESTION 37
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.
In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)
- A. Install the SnapMirror Sync license on the cluster.
- B. Use ONTAP Select Deploy to Install the nodes on the physical hardware.
- C. Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.
- D. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.
Answer: B,D
NEW QUESTION 38
You are using NetApp Volume Encryption (NVE) on an AFF system.
In this scenario, which two key-management solutions are supported for NVE? (Choose two.)
- A. the onboard key management service
- B. an XTS-AES-256 key manager
- C. a KMIP server
- D. an SSH key manager
Answer: A,C
NEW QUESTION 39
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Create a LIF for SVM management.
- B. Configure role-based access control (RBAC) for the vsadmin user account.
- C. Set a password for (the vsadmin user account.
- D. Create the vsadmin user account in the new SVM.
Answer: C,D
NEW QUESTION 40
Click the Exhibit button.
The volumes shown in the exhibit, vol1 and vol2, are in the same AFF aggregate. You write the same large 100 GB file to both vol1 and vol2.
Based on the volume efficiency settings, which action occurs?
- A. The files are deduplicated at the SVM level by SVM1.
- B. The files are queued for a background deduplication schedule.
- C. The files are deduplicated at the volume level.
- D. The files are deduplicated at the aggregate level.
Answer: C
NEW QUESTION 41
You are currently using SnapMlrror Synchronous (SM-S) to protect a critical workload at your organization and you want to convert the SnapMlrror policy from Sync to StrictSync.
In this scenario, which procedure allows you to achieve this task?
- A. Modify the existing SnapMirror relationship specifying the strictsync policy, then re-synchronize It.
- B. Recreate the SnapMlrror relationship, specifying the strictsync policy, then promote It.
- C. Modify the existing SnapMirror relationship specifying the strictsync policy, then promote It.
- D. Recreate the SnapMirror relationship, specifying the strictsync policy, then re-synchronize it.
Answer: A
NEW QUESTION 42
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the subnet-name option
- C. the auto-revert option
- D. the failover-policy option
Answer: D
NEW QUESTION 43
Exhibit.
You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.
Referring to the exhibit, what is the issue?
- A. The initiator is a member of igroups of different OS types.
- B. The igroup contains the wrong protocol.
- C. The igroup contains multiple Initiators.
- D. The igroup does not contain the appropriate initiators.
Answer: C
NEW QUESTION 44
Your company wants to Increase access security In both their NFS and ISCSI environments. Currently ISCSI Is not authenticated and NFS relies only on export policies for security.
Which two enhancements do you use to satisfy this new criteria? (Choose two.)
- A. Enable Kerberos for iSCSI LUN access.
- B. Enable Kerberos for NFS exports.
- C. Enable Challenge-Handshake Authentication Protocol (CHAP) for NFS exports.
- D. Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.
Answer: A,C
NEW QUESTION 45
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would Improve performance?
- A. Automated Workload Analyzer
- B. ONTAP System Manager
- C. Active IQ Unified Manager
- D. OnCommand Workflow Automation
Answer: D
NEW QUESTION 46
All SMB users are reporting that their network share performance Is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.
In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)
- A. Enable flow control end-to-end on data network ports.
- B. Enable flow control end-to-end on cluster network ports.
- C. Disable flow control end-to-end on data network ports.
- D. Disable flow control end-to-end on cluster network ports.
Answer: A,D
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/What_are_the_flow_control_best_practices_for_Ethernet%3F#Clustered_Data_ONTAP_.2F_ONTAP_9_Flow_control_recommendations:
Disable flow control on cluster network ports in the Data ONTAP cluster. Flowcontrol on the remaining network ports (the ports that provide data, management, and intercluster connectivity) should be configured to match the settings within the rest of your environment.
NEW QUESTION 47
You currently have a Cloud Volumes ONTAP instance running and need to have read/write access to a volume on an on-premises ONTAP cluster.
In this scenario, which feature do you use?
- A. Flash Pool
- B. Flash Cache
- C. FlexCache
- D. SnapMirror
Answer: D
NEW QUESTION 48
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?
- A. Synchronize the origin and cache first with the volume flexcache sync-properties command.
- B. Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.
- C. Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.
- D. Enable block-level Invalidation using the volume flexcache origin config modify command.
Answer: B
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-fc-mgmt%2FGUID-E878AB6F-2A64-4E66-B865-6C11A0962AA9.html
NEW QUESTION 49
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)
- A. NKS
- B. XCP
- C. FLI
- D. ADP
Answer: A,D
NEW QUESTION 50
Exhibit.
Miss-----------------
The availability of the remote cluster in the peering relationship shows "Partial." Referring to the exhibit, what is the reason for this status message?
- A. Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.
- B. The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.
- C. The local cluster is unable to authenticate successfully to the remote cluster.
- D. The remote cluster does not have its cluster license applied properly.
Answer: A
Explanation:
Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster.
Partial - The peer cluster availability status will be Partial only if some nodes in the local cluster are not able to contact some or all nodes in the peer cluster. https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-cmpr-991/cluster__peer__show.html?cp=5_1_10_18_5
NEW QUESTION 51
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?
- A. SnapMirror Synchronous (SMS)
- B. SVM Disaster Recovery (SVM DR)
- C. SnapMirror Business Continuity (SM-BC)
- D. SyncMlrror
Answer: A
NEW QUESTION 52
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)
- A. Set the fractional reserve to "0".
- B. Increase the size of the volume.
- C. Increase the number of files permitted on the volume.
- D. Set the space guarantee to 'volume".
Answer: B,D
NEW QUESTION 53
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NVMe
- B. SMB
- C. ISCSI
- D. NFS
Answer: A,C
NEW QUESTION 54
Which two storage efficiency features are enabled by default on AFF systems? (Choose two.)
- A. aggregate-level inline deduplication
- B. volume-level Inline deduplication
- C. LUN-level compression
- D. aggregate-level compression
Answer: A,B
NEW QUESTION 55
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.)
- A. cluster
- B. node
- C. data
- D. admin
Answer: B,D
NEW QUESTION 56
SnapMirror Business Continuity (SM-BC) relies on a component to trigger an automatic unplanned failover (AUFO). In this scenario, what is this component?
- A. Cloud Manager
- B. ONTAP Mediator
- C. ONTAP Deploy
- D. Tiebreaker software
Answer: B
NEW QUESTION 57
......
Verified Pass NS0-162 Exam in First Attempt Guaranteed: https://www.realvalidexam.com/NS0-162-real-exam-dumps.html
Free NS0-162 Sample Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=1KXVzQ0q6rkjTzdYyW0duk9FaKs6TBX2z
