Real 1Y0-241 are Uploaded by RealValidExam provide 2021 Latest 1Y0-241 Practice Tests Dumps.
All 1Y0-241 Dumps and Deploy and Manage Citrix ADC 13 with Traffic Management Training Courses Help candidates to study and pass the Deploy and Manage Citrix ADC 13 with Traffic Management Exams hassle-free!
NEW QUESTION 29
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.
set gslb parameter -ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
- A. Empty Domain Service (EDS)
- B. Multiple IP responses (MIR)
- C. Time to live (TTL)
- D. Round-trip time (RTT)
Answer: D
NEW QUESTION 30
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. If
the vServer-CS-1 encounters a high connection rate, then users will be redirected to
http://www.newdomain.com/mysite/. - B. All
the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/. - C. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- D. If
the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
.com/mysite/.
Answer: D
NEW QUESTION 31
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS Proxy
- B. DNS Preferred Location
- C. DNS View
- D. DNS Record
Answer: C
NEW QUESTION 32
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE
- B. CORRUPT_HTTP_HEADER
- C. REPLACE_HTTP_REQ
- D. REPLACE_ALL
Answer: A
NEW QUESTION 33
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Redirect_Act respondwith
"DIAMETER.NEW_REDIRECT(\"aaa://host.example.com\")"
> add responder policy Redirect_Pol "diameter.req.avp(264).value.eq(\"host1.example.net\")" Redirect_Act
> bind lb vServer vs1 -policyName Redirect_Pol -priority 10 -type REQUEST What will be the effect of this configuration?
- A. Request originated from "host.example.net" will be redirected to "host1.example.com".
- B. Response originated from "host.example.net" will be redirected to "host1.example.com".
- C. Request originated from "host1.example.net" will be redirected to "host.example.com".
- D. Response originated from "host1.example.net" will be redirected to "host.example.com".
Answer: C
NEW QUESTION 34
Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1
"!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\"Admin_group\"))"
RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?
- A. All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.
- B. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.
- C. Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.
- D. Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.
Answer: B
NEW QUESTION 35
When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC communicate to the network switches and routers that IP-to-MAC address bindings have changed?
- A. Proxy ARP to update the network devices
- B. MAC-based forwarding (MBF) to update the routers
- C. Gratuitous ARPs (GARPs) to update the network devices
- D. Reverse ARP (RARP) to update the network devices
Answer: C
NEW QUESTION 36
Scenario: A Citrix Administrator is managing a Citrix Gateway with a standard Platform license and remote employees in the environment. The administrator wants to increase access by 3,000 users through the Citrix Gateway using VPN access.
Which license should the administrator recommend purchasing?
- A. Citrix ADC Burst Pack
- B. Citrix Gateway Universal
- C. Citrix Gateway Express
- D. Citrix ADC Upgrade
Answer: B
NEW QUESTION 37
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?
- A. Enable the content switching feature.
- B. Bind a certificate.
- C. Bind the default load-balancing vServer.
- D. Disable the spillover redirect URL.
Answer: C
NEW QUESTION 38
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?
- A. SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)
- B. SYS.CHECK.LIMIT(<limit_identifier>)
- C. HTTP.REQ.LIMIT(<limit_identifier>)
- D. SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)
Answer: B
NEW QUESTION 39
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. Integrated caching
- B. SSL
- C. System
- D. DNS
Answer: A,D
NEW QUESTION 40
What is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain .com/mysite/
. - B. If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http:// www.newdomain.com/mysite/.
- C. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- D. All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answer: A
NEW QUESTION 41
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Restore from the revision history.
- B. Run saved versus running configuration.
- C. Restart the Citrix ADC.
- D. Run highly availability (HA) file synchronization.
Answer: A
NEW QUESTION 42
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) - HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?
- A. Backup content switching vServer
- B. 10.1.100.100:443
- C. http://www.site1.com/mysite1/maintenance
- D. vServer-LB-2
Answer: C
NEW QUESTION 43
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Bind the domain to the CS vServer instead of the GSLB vServer.
- B. Configure CS policies that designate a load-balancing vServer as the target vServer.
- C. Configure a CS vServer of target type GSLB.
- D. Bind the GSLB domain to the GSLB vServer.
Answer: B,C
NEW QUESTION 44
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL bridge
- B. SSL policy
- C. SSL multiplexing
- D. SSL policy
- E. SSL profile
Answer: E
NEW QUESTION 45
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A private key
- B. A certificate revocation list (CRL)
- C. A certificate signing request (CSR)
- D. A certificate key-pair
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/create-and-use-ssl- certificates-on-a-citrix-adc-appliance.html
NEW QUESTION 46
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?
- A. Address (A) record
- B. Pointer Record (PTR)
- C. Canonical Name (CNAME)
- D. Name Server (NS) record
Answer: D
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/dns/configure-citrix-adc-adns-server.html
NEW QUESTION 47
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?
- A. A private key
- B. A certificate revocation list (CRL)
- C. A certificate signing request (CSR)
- D. A certificate key-pair
Answer: A
NEW QUESTION 48
A Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections.
Which Citrix ADC mode can the administrator use to meet this requirement?
- A. USNIP
- B. Layer 3
- C. USIP
- D. Layer 2
Answer: C
NEW QUESTION 49
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packet- forwarding function based on the route table lookups?
- A. USIP
- B. Layer 3
- C. Layer 2
- D. MBF
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configure- system-settings/configure-modes-packet-forwarding.html
NEW QUESTION 50
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/load- balancing.html
NEW QUESTION 51
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
'Unknown'.
What is causing the secondary state to be 'Unknown'?
- A. The synchronization on the secondary appliance is disabled.
- B. TCP port 22 is disabled between the primary and secondary ADCs.
- C. The administrator made both Citrix ADCs primary.
- D. The remote procedure call (RPC) nodes are incorrectly configured.
Answer: D
NEW QUESTION 52
Which mode does a Citrix Administrator need to configure to allow a Citrix ADC to control the packetforwarding function based on the route table lookups?
- A. USIP
- B. Layer 3
- C. Layer 2
- D. MBF
Answer: B
NEW QUESTION 53
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
- B. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- C. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
Answer: A
NEW QUESTION 54
......
Valid Way To Pass Citrix's 1Y0-241 Exam with : https://www.realvalidexam.com/1Y0-241-real-exam-dumps.html
Free Test Engine For Deploy and Manage Citrix ADC 13 with Traffic Management Certification Exams: https://drive.google.com/open?id=1uZwcupIB05ZeZskjssDQds1IB163ryqg
