Tested Material Used To 1Y0-440 Test Engine Exam Questions in here [Jul-2021]
Penetration testers simulate 1Y0-440 exam PDF
NEW QUESTION 26
Scenario: A Citrix Architect needs to design a hybrid XenApp and XenDesktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active XenApp and XenDesktop Service subscription
* No existing NetScaler deployment
* Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.
Click the Exhibit button to view the conceptual environment architecture.
The architect should use _____ in Location A, and should use ________ in Location B.
(Choose the correct option to complete the sentence.)
- A. NetScaler ADC (BYO); NetScaler ADC (BYO)
- B. NetScaler Gateway appliance; NetScaler ADC (BYO)
- C. NetScaler Gateway appliance; NetScaler Gateway appliance
- D. NetScaler ADC (BYO); No NetScaler products
- E. NetScaler ADC (BYO); NetScaler gateway appliance
Answer: D
NEW QUESTION 27
Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?
- A. Resilient deployment mode
- B. Mac-based forwarding option enabled.
- C. Net Profile
- D. Backup route
Answer: D
NEW QUESTION 28
A Citrix Architect needs to make sure that maximum concurrent AAA user sessions are limited to 4000 as a security restriction.
Which authentication setting can the architect utilize to view the current configuration?
- A. AAA Parameters
- B. AAA Virtual Server
- C. Global Session Settings
- D. Active User Session
Answer: C
NEW QUESTION 29
Scenario: A Citrix Architect needs to design a new NetScaler Gateway deployment to provide secure RDP access to backend Windows machines.
Click the Exhibit button to view additional requirements collected by the architect during the design discussions.
To meet the customer requirements, the architect should deploy the RDP proxy through _______, using a
_________ solution. (Choose the correct option to complete the sentence.)
- A. ICAProxy; single gateway
- B. ICAProxy, stateless gateway
- C. CVPN; stateless gateway
- D. CVPN; single gateway
Answer: D
NEW QUESTION 30
Which parameter indicates the number of current users logged on to the NetScaler gateway?
- A. Maximum User session
- B. ICA connections
- C. Total Connected Users
- D. Active user session
Answer: D
NEW QUESTION 31
Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
- A. Least packets
- B. least connection
- C. Static proximity
- D. Source IP hash
- E. Dynamic round trip time (RTT)
- F. Least response time
Answer: F
NEW QUESTION 32
Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:
* Users should be able to send the traffic only for the allowed networks through the VPN tunnel.
* Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.
* If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.
Which settings will meet these requirements?
- A. Split Tunnel to ON, Split DNS Local
- B. Split Tunnel to OFF, Split DNS Remote
- C. Split Tunnel to OFF, Split DNS Both
- D. Split Tunnel to ON, Split DNS Remote
Answer: A
NEW QUESTION 33
Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.
Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)
- A. Configure Single sign-on domain in Session profile 'userPrincipalName'.
- B. Configure SSO Name attribute to 'userPrincipalName' in LDAP Profile.
- C. Do NOT configure SSO Name attribute in LDAP Profile.
- D. Do NOT configure sign-on domain in Session Profile.
Answer: B,C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/storefront/3-12/plan/user-authentication.html
NEW QUESTION 34
Scenario: A Citrix Architect needs to assess an existing NetScaler configuration. The customer recently found that certain user groups were receiving access to an internal web server with an authorization configuration that does NOT align with the designed security requirements.
Click the Exhibit button view the configured authorization settings for the web server.
Which item should the architect change or remove to align the authorization configuration with the security requirements of the organization?
- A. Item 5
- B. Item 3
- C. Item 4
- D. Item 2
- E. Item 1
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 35
Scenario: A Citrix Architect has sent the following request to the NetScaler:
Which response would indicate the successful execution of the NITRO command?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 36
Which four load-balancing methods support NetScaler Virtual Server-Level Slow Start? (Choose four.)
- A. URLHash
- B. Least bandwidth
- C. Least Connection
- D. SRCIPSRCPORTHash
- E. Token
- F. Least Packets
- G. Least response time
Answer: B,C,F,G
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX108886
NEW QUESTION 37
Scenario: A Citrix Architect needs to deploy a load balancing for an application server on the NetScaler. The authentication must be performed on the NetScaler. After the authentication, the Single Sign-on with the application servers must be performed using Kerberos impersonation.
Which three authentication methods can the Architect utilize to gather the credentials from the user in this scenario? (Choose three.)
- A. TACACS
- B. LDAP
- C. WEBAUTH
- D. OTP
- E. SAML
Answer: B,C,E
NEW QUESTION 38
A Citrix Architect can execute a configuration job using a DeployMasterConfiguration template on a NetScaler_________deployed_________. (Choose the correct option to complete sentence.)
- A. MPX; as part of the cluster but Cluster IP is NOT configured
- B. SDX; with less than 6 partitions and dedicated management interface
- C. CPX; as a stand alone device
- D. SDX; with no partitions as a stand alone device
- E. CPX; as part of a high availability pair
Answer: B
NEW QUESTION 39
Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.
Based on the displayed configuration and status, Chil_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)
- A. accepts; SiteP3; becomes its child site
- B. does NOT receive; SiteP2 and SiteP3; remains a child site of SiteP1
- C. rejects; SiteP3; remains a child site of SiteP1
- D. rejects; SiteP2 and SiteP3; remains a child site of SiteP1
- E. accepts; SiteP2; becomes its child site
- F. rejects; SiteP2; remains a child site of SiteP1
Answer: B
NEW QUESTION 40
Scenario: The Workspacelab team has configured their NetScaler Management and Analytics (NMAS) environment. A Citrix Architect needs to log on to the NMAS to check the settings.
Which two authentication methods are supported to meet this requirement? (Choose two.)
- A. AAA
- B. Certificate
- C. RADIUS
- D. TACACS
- E. SAML
- F. Director
Answer: C,D
NEW QUESTION 41
......
Authentic Best resources for 1Y0-440 Online Practice Exam: https://www.realvalidexam.com/1Y0-440-real-exam-dumps.html
Get the superior quality 1Y0-440 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1snfWHW3bm279MSTOr5MReWkJ04IPFscg
