[Oct 25, 2023] Get Unlimited Access to 300-610 Certification Exam Cert Guide
Reliable Study Materials for 300-610 Exam Success For Sure
NEW QUESTION # 98
A network design must include a solution to run CLI commands remotely on Cisco Nexus 9000 Series Switches. The customer's security policy requires secure login credentials and an encrypted underlying transport. The command output will be processed rising tools that support XML or JSON encoding.
Which two components should be included in the design? (Choose two.)
- A. SSH
- B. HTTPS
- C. HTTP
- D. NX-API
- E. Bash shell
Answer: B,D
Explanation:
Reference:
Programmability_Configuration_Guide_chapter_0101.html
NEW QUESTION # 99
A network engineer must create a Fibre Channel fabric QoS design for an existing data center. The solution must provide relative bandwidth guarantees to application traffic, control latency, and prioritize application traffic.
Which mechanism must be deployed to support these requirements?
- A. traffic policing
- B. traffic remarking
- C. traffic classification
- D. traffic shaping
Answer: D
NEW QUESTION # 100
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects? (Choose two.)
- A. The STP parameter configuration is supported.
- B. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- C. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- D. The STP parameter configuration is unsupported.
- E. STP runs on the server ports.
Answer: B,D
NEW QUESTION # 101
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 102
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. MACsec
- B. L2TPv3
- C. L2TPv2
- D. IPsec
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/Enterprise/Security/MACsec/WP-High-Speed-WAN-Encrypt-MACsec.pdf
NEW QUESTION # 103
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS С-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:
Provide multipathing and high availability in the event of a critical path failure.
Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)
- A. uplink pinning
- B. software iSCSI adapter
- C. storage binding
- D. hardware iSCSI NIC
- E. system VLAN
Answer: B,C
NEW QUESTION # 104
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running iSCSI multipath software. Each IP storage port on the MDS switch exports the same two Fibre Channel target ports with different iSCSI target names.
In this design, how many iSCSI sessions are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 105
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)
- A. The STP parameter configuration is supported.
- B. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- C. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- D. The STP parameter configuration is unsupported.
- E. STP runs on the server ports.
Answer: B,D
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION # 106
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Primary
- B. Updating
- C. Initial
- D. Secondary
Answer: C
NEW QUESTION # 107
A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode. Which type of management network must be used to integrate vCenter with ACI?
- A. ARC infra
- B. In-band management
- C. VLAN infra
- D. out-of-band management
Answer: D
NEW QUESTION # 108
An engineer enables the HSRP feature on a Cisco Nexus 7000 Series Switch. It must be ensured that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address.
Which command accomplishes this goal?
- A. peer-switch
- B. map-server
- C. peer-gateway
- D. hsrp preempt
Answer: C
NEW QUESTION # 109
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 110
A confidentially and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used. Which technology must be used to support these requirements?
- A. MACsec
- B. GRE
- C. OTV
- D. IPsec
Answer: A
Explanation:
The key to solution is "Ethernet frames". Frames are layer 2. IPsec encrypts at layer 3.
NEW QUESTION # 111
Which address pool is used when a vHBA template is created?
- A. WWPN
- B. MAC
- C. UUID
- D. IP
Answer: A
Explanation:
Section: Automation Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/ b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html
NEW QUESTION # 112
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. target server
- B. UUID assignment
- C. number of vHBAs
- D. ARP entries
- E. VXLAN membership
Answer: B,C
Explanation:
Section: Automation Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0100000.html
NEW QUESTION # 113
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?
- A. MACsec
- B. L2TPv3
- C. L2TPv2
- D. IPsec
Answer: A
NEW QUESTION # 114
A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.
Which action guarantees line rate traffic processing on the interface?
- A. Set local buffering with B2B_credits for the interface.
- B. Configure the interface rate mode as shared.
- C. Configure the interface rate mode as dedicated.
- D. Set global buffering with B2B_credits for the interface.
Answer: C
NEW QUESTION # 115
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. FC end-host mode
- B. NPIV mode
- C. NPV mode
- D. FC switching mode
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/ b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.html
NEW QUESTION # 116
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 117
A customer needs a design for a new data center network that meets these requirements:
Logically partition the environment into separate security domains.
Cut costs related to purchasing additional equipment.
Separate routing processes, TCAM, QoS tables, and data planes.
Which technology must be used?
- A. VLAN
- B. vPC
- C. VDC
- D. VRF
Answer: C
NEW QUESTION # 118
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 119
An engineer must build a VXLAN flood-and-learned network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
- A. MVPN
- B. PIM SSM
- C. Bidirectional PIM
- D. PIM sparse mode
Answer: C
NEW QUESTION # 120
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 121
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?
- A. LAN connectivity
- B. vNIC placement
- C. Ethernet adapter
- D. Dynamic vNIC connection
Answer: C
Explanation:
Reference:
Ethernet adapter policy is the only policy that is having configuration that is related to CPU.
NEW QUESTION # 122
......
New Cisco 300-610 Dumps & Questions: https://www.realvalidexam.com/300-610-real-exam-dumps.html
100% Latest Most updated 300-610 Questions and Answers: https://drive.google.com/open?id=1ZnbzxMBTFfVacVkX5jGHOLmsUUpwoqKi
