[Jan 28, 2024] 100% Pass Guarantee for 300-430 Dumps with Actual Exam Questions
Today Updated 300-430 Exam Dumps Actual Questions
Passing the Cisco 300-430 exam validates the candidate's skills in implementing and managing enterprise wireless networks using Cisco technologies. Implementing Cisco Enterprise Wireless Networks certification opens up new career opportunities for professionals in the wireless networking field, as it is recognized globally as proof of the candidate's expertise in wireless networking.
To prepare for the Cisco 300-430 exam, candidates are advised to have a solid understanding of Cisco wireless technologies, including Cisco Unified Wireless Network, Cisco Mobility Express, and Cisco Wireless LAN Controller. Candidates should also have experience in configuring and troubleshooting wireless networks. The Cisco website offers a variety of study materials, including training courses, practice exams, and study guides, to help candidates prepare for the exam.
NEW QUESTION # 58
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the
5.0-GHz band. - B. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- C. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- D. Configure a second WLC to support half of the APs in the deployment.
Answer: C
NEW QUESTION # 59
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9. Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit 0.0.0.0 0.0.0.0 UDP DNS any
- B. Permit any any any
- C. Permit 0.0.0.0 0.0.0.0 any DNS any
- D. Permit 0.0.0.0 0.0.0.0 UDP any DNS
- E. Permit 0.0.0.0 0.0.0.0 UDP any any
Answer: A,D
NEW QUESTION # 60
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
- A. AP name
- B. X, Y real location
- C. WLC IP address
- D. client description
- E. client MAC address
Answer: B,E
NEW QUESTION # 61
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. malware
- B. lost and stolen devices
- C. network analyzers
- D. unauthorized users
- E. keyloggers
Answer: A,B
Explanation:
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION # 62
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan add 30
- B. config flexconnect group BranchA-FCG vlan 30 add
- C. config flexconnect group BranchA-FCG vlan add 30
- D. config flexconnect BranchA-FCG vlan 30 add
Answer: C
Explanation:
NEW QUESTION # 63
Refer to the exhibit. Which COS to DSCP map must be modified to ensure that voice traffic is tagged correctly as it traverses the network?
- A. COS of 6 to DSCP 46
- B. COS of 3 to DSCP 26
- C. COS of 7 to DSCP 48
- D. COS of 5 to DSCP 46
Answer: D
NEW QUESTION # 64
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/technology/roguedetection_deploy/ Rogue_Detection.html
NEW QUESTION # 65
The marketing department creates a promotion video for the branch store. Only interested hosts must receive the video over wireless multicast. What allows this feature?
- A. DCA
- B. TPC
- C. WMF
- D. WMM
Answer: C
NEW QUESTION # 66
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Set QoS to Platinum
- B. Trust DSCP
- C. Allow WMM
- D. Enable CAC
Answer: B
Explanation:
NEW QUESTION # 67
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. LDAP
- B. RADIUS
- C. network policy server
- D. TACACS+
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_161/ConfigExamples_Technotes/Techzone_Articles/Example_and_Technotes_Denali_16_1_1/Example_and_Technotes_Denali_16_1_1_chapter_010110.pdf
https://community.cisco.com/t5/wireless-mobility-documents/wlc-and-acs-5-x-tacacs-configuration-example-web-authentication/ta-p/3120681
NEW QUESTION # 68
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS cannot use UDP port 5353 as the destination port.
- B. mDNS is not supported over IPv6.
- C. mDNS uses only UDP port 5436 as a destination port.
- D. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- E. Controller software must be newer than 7.0.6+.
Answer: B,D
Explanation:
NEW QUESTION # 69
An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode. WLAN A works but WLAN B does not. When converting APs to local mode. WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?
- A. Create a Cisco FlexConnect group with WLAN-VLAN mapping.
- B. Disable local switching on the WLANs.
- C. Join the APs to a Cisco FlexConnect group.
- D. Map the AP group to the WLAN interface.
Answer: A
NEW QUESTION # 70
An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?
- A. ReadWrite User Access Mode
- B. Allow New Telnet Sessions
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_C - C. Global Configuration Enable Password
- D. SNMP V3 User
Answer: C
NEW QUESTION # 71
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?
- A. FlexConnect ACL
- B. VLAN name override
- C. CCKM/OKC
- D. AAA override
Answer: D
Explanation:
NEW QUESTION # 72
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. WMM
- B. SIFS
- C. TSPEC
- D. APSD
- E. 802.11e
Answer: A,E
NEW QUESTION # 73
A downstream packet that contains a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination?
- A. No outer CAPWAP or inner QoS tagging is applied.
- B. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.
- C. The outer CAPWAP CoS is marked and capped and the inner DSCP maintains the original marking.
- D. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP.
Answer: C
NEW QUESTION # 74
Refer to the exhibit. A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
- B. Disable DHCP proxy on the Cisco WLC.
- C. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- D. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
Answer: D
NEW QUESTION # 75
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS is not supported over IPv6.
- B. mDNS cannot use UDP port 5353 as the destination port.
- C. mDNS uses only UDP port 5436 as a destination port.
- D. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- E. Controller software must be newer than 7.0.6+.
Answer: D,E
NEW QUESTION # 76
Which statement about the VideoStream/Multicast Direct feature is true?
- A. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.
- B. It converts the unicast frame to a multicast frame over the air.
- C. Each VideoStream client acknowledges receiving a video IP multicast stream.
- D. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
Answer: C
Explanation:
NEW QUESTION # 77
......
300-430 exam dumps with real Cisco questions and answers: https://www.realvalidexam.com/300-430-real-exam-dumps.html
300-430 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1HRaXxi6S8ey_ixz9gFedpvbxna47Y9Tw
