Jan-2022 Nutanix NCSC-Level-1 Actual Questions and 100% Cover Real Exam Questions
NCSC-Level-1 Free Exam Questions & Answers PDF Updated on Jan-2022
NEW QUESTION 47
A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)
- A. Foundation Central
- B. Foundation Portable
- C. Foundation Applet
- D. Foundation VM
Answer: B,C
NEW QUESTION 48
A consultant is planning an installation and needs to collect configuration items to be used during the install. The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A. Questionnaire
- B. Technical Checklist
- C. Operations Guide
- D. Project Plan
Answer: B
NEW QUESTION 49
What reference materials should be provided to the customer during the Knowledge Transfer?
- A. As-Built Guide, technical slides and checklist, links to documentation and resources
- B. Questionnaire, technical slides and checklist, links to documentation and resources
- C. As-Built Guide, technical slides and checklist, Network Diagram
- D. As-Built Guide, Project Plan, links to documentation and resources
Answer: A
NEW QUESTION 50
A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.
Which method should be consultant use to meet the requirements?
- A. Integrate AD authentication on Prism Central Only.
- B. Integrate AD authentication on all Prism Element Clusters.
- C. Integrate AD authentication on all CVMs.
- D. Proxy Prism Element traffic through Prism Central.
Answer: A
NEW QUESTION 51
A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?
- A. Stop the Nutanix cluster before changing VLANs.
- B. Only change the hypervisor VLANs.
- C. Only change the Controller Virtual Machine VLANs.
- D. Restart the Nutanix cluster.
Answer: A
NEW QUESTION 52
A customer wants to know the details of network validation testing.
Where can the consultant find this information?
- A. Handover checklist
- B. Operations Guides
- C. Test plan
- D. As-Built Guide
Answer: A
NEW QUESTION 53
A consultant is using the Foundation applet to create a cluster. During the process the consultant refreshes the progress bar web page and is concerned when nothing loads.
What should the consultant do to verify that Foundation has completed successfully?
- A. Connect to any CVM IP address from a web browser.
- B. Restart the Foundation process.
- C. Update Java on the Foundation VM.
- D. Return to the Foundation configuration page and start over.
Answer: A
NEW QUESTION 54
After a recent installation using a flat switch, a consultant notices issues migrating the Nutanix nodes to the customer's network. The customer states that they are using VLANs on the production switch but not on the dedicated switch for IPMI. The customer does not require a manual configuration of the host and CVM.
What network changes need to be made to correct the issues?
- A. Use Native VLANs for the CVM and host and trunk mode for IPMI.
- B. Use tagged VLANs for the CVM and host and access mode for IPMI.
- C. Use Native VLANs for the CVM and host and access mode for IPMI.
- D. Us untagged VLANs for the CVM and host and trunk mode for IPMI.
Answer: C
NEW QUESTION 55
A consultant is planning a new cluster installation and needs to locate the Shared IPMI port for each of the specific nodes that the customer has bought.
Which Support Portal location contains the document that would identify the port?
- A. Knowledge Base
- B. Solutions Documentation
- C. Software Documentation
- D. Hardware Replacement Documentation
Answer: D
NEW QUESTION 56
Which Nutanix feature creation is described in the Knowledge Transfer?
- A. Self Service Portal
- B. Calm Blueprints
- C. Data Protection Domain
- D. REST API
Answer: C
NEW QUESTION 57
Refer to the exhibits.
A consultant is trying to test port failover on the node shown in the first exhibit. A continuous ping test is performed to the host. The consultant shuts down one of the links, after which the host ping request times out. The consultant tries to troubleshoot the issue with the customer and sees the information shown in the second exhibit on their Cisco Switches:
What is causing the issue?
- A. The wrong VLAN is tagged on the host.
- B. PortFast is not enabled on the port connected to the host.
- C. There is a Native VLAN mismatch on the switchport.
- D. Bad SPF+ cables are on the active interface.
Answer: C
NEW QUESTION 58
A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?
- A. Compression was turned on for all containers.
- B. A Container-level whitelist entry was configured.
- C. Deduplication was turned on for all containers.
- D. A Global whitelist entry was configured.
Answer: D
NEW QUESTION 59
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
- A. first_boot.log
- B. service.log
- C. genesis.out
- D. foundation.out
Answer: B
NEW QUESTION 60
A consultant is deploying a Nutanix cluster at a customer location. The consultant will be deploying the latest AOS along with the latest Nutanix hardware.
Which three references should the consultant review prior to this installation? (Choose three.)
- A. End-Of-Life (EOL) Information
- B. Software Product Interoperability
- C. Field & Security Advisories
- D. Release Notes
- E. Acropolis Advanced Administration Guide
Answer: B,C,D
NEW QUESTION 61
A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?
- A. Disable VM Monitoring on all CVMs.
- B. Enable EVC for the cluster.
- C. Disable Automation Level on all CVMs.
- D. Enable Host Monitoring.
Answer: C
NEW QUESTION 62
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)
- A. vSphere HA
- B. vSphere Power Management
- C. vShpere DRS
- D. vSphere vMotion
Answer: A,C
NEW QUESTION 63
Refer to the exhibit.
A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?
- A. Link Aggregation
- B. Multi-homing
- C. Range Autofill
- D. Network Segmentation
Answer: B
NEW QUESTION 64
......
Nutanix NCSC-Level-1 Real 2022 Braindumps Mock Exam Dumps: https://www.realvalidexam.com/NCSC-Level-1-real-exam-dumps.html
