Get 2023 Updated Free HP HPE6-A71 Exam Questions and Answer
HPE6-A71 Dumps PDF and Test Engine Exam Questions
NEW QUESTION # 11
Refer to the exhibit.
Anadministrator wants to centralize administrative access to the Aruba Mobility Controllers (MC) and Mobility Master (MM). ClearPass is set up and the preferred authentication protocols is TACACS+. Where should the administrator perform this configuration inthe MM hierarchy shown in the exhibit?
- A. At the two campus levels
- B. At both the Mobility Master and Managed Network levels
- C. At the Managed Network level
- D. At the controller levels
Answer: B
NEW QUESTION # 12
A guest establishes an authenticated wireless session to an ArubaMobility Controller (MC). The controller uses a ClearPass server for all AAA functions.
Which AAA component disconnects the user when the guest exceeds their allowed duration?
- A. Active Directory Session Limits
- B. RADIUSAuthorization Profile
- C. RADIUS Change of Authorization
- D. SNMP Disconnect
Answer: C
NEW QUESTION # 13
Refer to the exhibit.
A user uses Microsoft Windows for a wireless session. Based on the output shown in the exhibit for the selected Aruba AP, what is the possible problem with this user's wireless session?
- A. The user is configured for PEAP, but the WLAN profile on the controller implemented EAP-TLS.
- B. The controller cannot reach the AAA server to perform the authentication.
- C. The AP has reached the limit for number of users that are allowed to connect to the radio.
- D. The user misconfigured the Managed Network Settings profile in Windows.
Answer: A
NEW QUESTION # 14
Refer to the exhibit.
What can be determined from the command output shown in the exhibit?
- A. The synchronization period is at its default value.
- B. The synchronized data is protected by VRRP.
- C. The command was executed on the standby Mobility Master (MM).
- D. The other Mobility Master (MM) is the active license server.
Answer: A
NEW QUESTION # 15
An administrator creates a user role that department A in acompany uses. Various other roles exist for other departments. All employees connect to the same ESSID, which authenticates to an external AAA server. How should the administrator configure to assign the appropriate roles to the employees?
- A. implement server-derived roles
- B. implement default roles
- C. implement user roles
- D. implement AAA profile roles
Answer: C
NEW QUESTION # 16
An administrator needs to authenticate users connected to an ArubaOS-Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
- A. Split-tunneled mode
- B. VLAN tunneled mode
- C. Per-port tunneled node
- D. Per-user tunneled node
Answer: C
NEW QUESTION # 17
An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.
Which process should the administrator perform to reset the AP back to its initial default state?
- A. From apboot mode, execute purgeenv.
- B. From the AP's ArubaOS CLI, execute write erase all.
- C. From apboot mode, execute factory_reset.
- D. From the controller's ArubaOS, execute write erase all.
Answer: C
NEW QUESTION # 18
Refer to the exhibit. An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADUIS AAA server authenticates clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.
By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?
- A. The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA).
- B. The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event.
- C. Theuser's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.
- D. The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server.
Answer: C
NEW QUESTION # 19
Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?
- A. Split-tunnel
- B. Decrypt-tunnel
- C. Bridge
- D. Tunnel
Answer: C
NEW QUESTION # 20
Which protocol is used between Aruba Mobility Controllers (MC) and ArubaOS-Switches to negotiate tunneled node?
- A. IPSec
- B. SNMP
- C. GRE
- D. PAPI
Answer: C
Explanation:
Explanation
NEW QUESTION # 21
An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the Aruba Mobility Controller (MC)?
- A. OpenFlow profile
- B. Skype ALG Configuration profile
- C. OpenFlow Controller profile
- D. Mgmt Config profile
Answer: D
NEW QUESTION # 22
Anadministrator currently manages an L2 cluster with Aruba Mobility Controllers (MCs) that run ArubaOS
8.x. What happens when the administrator enables AP load balancing?
- A. Users must re-authenticate if they are moved from one controller to another because load balancing is performed.
- B. Balancing of users is based on a hash of their IP address.
- C. AP load balancing is triggered based on the amount of user traffic thatusers generate.
- D. AP load balancing occurs when the rebalance and unbalance thresholds are met.
Answer: C
NEW QUESTION # 23
An administrator implements machine authentication in an 802.1X profile. Which user role will be assigned to the user's session if machine authentication passes, but the 802.1X user authentication fails for a user who connects?
- A. 802.1X initial user role
- B. Machine authentication default machine role
- C. 802.1X default user role
- D. Machine authentication default user role
Answer: B
NEW QUESTION # 24
An administrator has ArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role.
Which implementation meets these requirements?
- A. Per-port tunneled node with the controllers configured in a cluster
- B. Per-port tunneled node with the controllers configured for standalone mode
- C. Role-based tunneled node with the controllers configured in a cluster
- D. Role-based tunneled node with the controllers configured for standalone mode
Answer: B
NEW QUESTION # 25
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- B. Have the MultiZone APs initially boot from the standalone controller in the data zone.
- C. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
- D. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
Answer: A
NEW QUESTION # 26
An administrator needs to support Unified Communications and Collaboration (UCC) in a company's network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications.
Which controller topology meets these requirements?
- A. Mobility Master-Mobility Controller
- B. Standalone Mobility Controller
- C. Master-Local
- D. Zones
Answer: A
NEW QUESTION # 27
Refer tothe exhibits.
Exhibit 1: WLAN VAP configuration
Exhibit 2: Microsoft NPS server configuration
Exhibit 3: Server group configuration for the VAP.
An employee authenticates with the username employee and the correct password. However, once theuser authenticates, an administrator notices that the employee is assigned the authenticated role and not the desired employee role.
What should the administrator do to solve this problem?
- A. Associate the user to the employee group in Microsoft NPS.
- B. Change the server group name on the controller.
- C. Add a new server group rule on the controller.
- D. Reference the employee role in the WLAN VAP on the controller.
Answer: C
Explanation:
Explanation
We have to add new rule:
Filter-Id - equals - EMPL - string - set role -employee
NEW QUESTION # 28
An administrator creates a mesh cluster profile and has defined the RF band and cluster name. What else must the administrator configure in the profile?
- A. WPA hexkey or passphrase
- B. IPSec
- C. CPSec
- D. Mesh portal IP address(es)
Answer: A
NEW QUESTION # 29
When an administrator manually adds a Mobility Controller (MC) on the Mobility Master (MM) hierarchy, which parameters must be specified? (Select three.)
- A. IP address
- B. MAC address
- C. Device type
- D. Serial number
- E. Hostname
Answer: B,C,E
NEW QUESTION # 30
Refer to the exhibit.
Once connected to a WLAN, a user cannot reliably access resources in acompany's network. Based on the output shown in the exhibit, what can be determined about the user's connection?
- A. The user is connected to an ArubaOS-Switch.
- B. The user is connected to a controller through use of the VIA client.
- C. Theuser is connected wirelessly to a controller.
- D. The user has successfully authenticated through use of PEAP.
Answer: D
NEW QUESTION # 31
An administrator wants to implement a cluster of Aruba Mobility Controllers (MCs). Which guideline should be followed?
- A. Purchase a cluster license to enable clustering
- B. Implement Virtual Mobility Controllers and Mobility Controllers in the cluster to provide scalability.
- C. Implement High Availability (HA) AP Fast Failover for redundancy.
- D. Verify that all the controllers run the same release of software.
Answer: D
NEW QUESTION # 32
An administrator adds local administrative accounts to manage the Aruba Mobility Controllers (MCs). Which role should the administrator assign to an administrator who should have the same privileges as the default admin account?
- A. root
- B. admin
- C. superuser
- D. level-15
Answer: A
NEW QUESTION # 33
An administrator wants to add a new folder in AirWave. Where would the administrator perform this action?
- A. in AMP Setup
- B. inDevice Setup
- C. in Groups
- D. in AP/Devices
Answer: D
NEW QUESTION # 34
A cluster has two Aruba 7240 Mobility Controllers (MCs) and two Aruba 7220Mobility Controllers (MCs).
How is the cluster leader elected if all controllers have the default priority?
- A. The 7240 controller with the highest MAC address is elected.
- B. The controller with the highest MAC address is elected.
- C. The controller with the highest IP address is elected.
- D. The 7240 controller with the lowest IP address is elected.
Answer: A
NEW QUESTION # 35
......
Verified HPE6-A71 exam dumps Q&As with Correct 173 Questions and Answers: https://www.realvalidexam.com/HPE6-A71-real-exam-dumps.html
Get New HPE6-A71 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1vLWAc1JQ0CpCmUFf7LLWpguuI4J5MtyD
