Free EMC DEA-5TT2 Test Practice Test Questions Exam Dumps Prepare Top EMC DEA-5TT2 Exam Audio Study Guide Practice Questions Edition EMC DEA-5TT2 (Associate - Networking) Certification Exam is a valuable credential for IT professionals who work with networks. It validates their skills and knowledge in network design, implementation, and management, and demonstrates their commitment to professional [...]

Free EMC DEA-5TT2 Test Practice Test Questions Exam Dumps [Q25-Q42]

Share

Free EMC DEA-5TT2 Test Practice Test Questions Exam Dumps

Prepare Top EMC DEA-5TT2 Exam Audio Study Guide Practice Questions Edition


EMC DEA-5TT2 (Associate - Networking) Certification Exam is a valuable credential for IT professionals who work with networks. It validates their skills and knowledge in network design, implementation, and management, and demonstrates their commitment to professional development. Associate - Networking Exam certification is recognized globally and can help professionals advance their careers in the IT industry.

 

NEW QUESTION # 25
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients.
Which IPv6 address prefix will the default gateway have on a client?

  • A. fe80::/64
  • B. ff02::/8
  • C. fd01::/64
  • D. fe08::/64

Answer: A


NEW QUESTION # 26
Refer to the exhibit.

Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?

  • A. Switch B Gi1/0/2
  • B. Switch B Gi1/0/1
  • C. Switch A Gi1/0/1
  • D. Switch A Gi1/0/2

Answer: C


NEW QUESTION # 27
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?

  • A. Listening
  • B. Learning
  • C. Forwarding
  • D. Blocking

Answer: B


NEW QUESTION # 28
The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?

Answer:

Explanation:


NEW QUESTION # 29
A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been enabled on the switch.
Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?

  • A. Switch drops the packet.
  • B. Switch duplicates the packet and sends it to all interfaces.
  • C. Switch checks its routing table and forwards the packet accordingly.
  • D. Switch replies back to the source with an ICMP Reject packet.

Answer: C


NEW QUESTION # 30
Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a host device?

  • A. 182.15.23.224
  • B. 182.15.26.10
  • C. 182.15.25.255
  • D. 182.15.25.0

Answer: D


NEW QUESTION # 31
On which Dell EMC Networking switches can Multi-Chassis Link Aggregation (MLAG) be configured?

  • A. C9000 Series
  • B. N-Series
  • C. Z-Series
  • D. S-Series

Answer: B


NEW QUESTION # 32
What is the aggregated lanes' maximum speed rating for a QSFP28 transceiver?

  • A. 40 Gbps
  • B. 112 Gbps
  • C. 128 Gbps
  • D. 4 Gbps

Answer: B


NEW QUESTION # 33
Which formula is used for calculating OSPF interface costs?

  • A. Reference bandwidth - interface bandwidth
  • B. Reference bandwidth / interface bandwidth
  • C. Reference bandwidth + interface bandwidth
  • D. Interface bandwidth / reference bandwidth

Answer: D


NEW QUESTION # 34
On which OSI layers do standard ACL filters operate?

  • A. 2 and 3
  • B. 2 and 7
  • C. 4 and 7
  • D. 3 and 4

Answer: D


NEW QUESTION # 35
Which Border Gateway Protocol (BGP) version supports IPv6?

  • A. BGPv4
  • B. BGPv3
  • C. BGPng
  • D. BGPv2

Answer: A


NEW QUESTION # 36
What are the Protocol Data Units (PDUs) called at the Transport layer?

  • A. Segment
  • B. Data Payload
  • C. Packets
  • D. Frame

Answer: A


NEW QUESTION # 37
A network administrator created three VLANs on an Ethernet switch. How many broadcast domains are created by the switch?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A


NEW QUESTION # 38
A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?

  • A. Load balanced using a hash function
  • B. Load balanced per packet using round robin
  • C. Interfaces will be used in active/passive
  • D. Traffic overflow will be sent to the second interface

Answer: A


NEW QUESTION # 39
What is the default route preference value for a Border Gateway Protocol (BGP) internal route?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 40
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?

  • A. Switch
  • B. NIC
  • C. Router
  • D. Repeater

Answer: D


NEW QUESTION # 41
What are Network Address Translation (NAT) inside global addresses?

  • A. Pubic addresses used by other networks outside of the local network
  • B. Addresses used by NAT router when sending frames to devices on the local network
  • C. Public IP addresses used by the local network to communicate with the Internet
  • D. Private IP addresses used by the local network

Answer: C


NEW QUESTION # 42
......


EMC DEA-5TT2 (Associate - Networking) Exam is an industry-standard certification exam that is designed to evaluate the knowledge and skills of candidates related to networking technologies. Associate - Networking Exam certification exam is intended for professionals who are looking to establish their careers in the field of networking and want to validate their skills and knowledge. DEA-5TT2 exam focuses on various topics such as networking concepts, network architecture, network design, network security, and network management.

 

Go to DEA-5TT2 Questions - Try DEA-5TT2 dumps pdf: https://www.realvalidexam.com/DEA-5TT2-real-exam-dumps.html