Exam Dumps NSE7_SDW-6.4 Practice Free Latest Fortinet Practice Tests
NSE7_SDW-6.4 Exam Questions | Real NSE7_SDW-6.4 Practice Dumps
NEW QUESTION 11
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers. The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links. One link has random jitter and latency issues, and is based on a wireless connection.
Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD-WAN rules? (Choose two.)
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Use the performance SLA targets to detect latency and jitter instantly.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Place the troublesome link at the top of the interface preference list.
- E. Choose the suitable interface based on the interface cost and weight.
Answer: A,B
NEW QUESTION 12
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. The FIB lookup resolved interface was the SD-WAN member interface
- B. Traffic has matched none of the FortiGate policy routes
- C. An absolute SD-WAN rule was defined and matched traffic
- D. Matched traffic failed RPF and was caught by the rule.
Answer: B,C
NEW QUESTION 13
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. Each IP is guaranteed a minimum 10 Mbps of bandwidth
- B. The 10 Mbps bandwidth is shared equally among the IP addresses.
- C. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- D. A single user uses the allocated bandwidth divided by total number of users.
Answer: C
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper
NEW QUESTION 14
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links.
- B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub.
- C. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance.
- D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
Answer: B,D
NEW QUESTION 15
Which statement is correct about the SD-WAN and ADVPN?
- A. Spoke support dynamic VPN as a static interface.
- B. ADVPN interface can be a member of SD-WAN interface.
- C. Dynamic VPN is not supported as an SD-Wan interface.
- D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
Answer: C
NEW QUESTION 16
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links
- B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
- C. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
- D. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance
Answer: A,B
NEW QUESTION 17
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
- B. Packets exceeding the configured concurrent connection limit are dropped based on tfte priority configuration.
- C. The packet exceeded the configured bandwidth and was dropped based on the priority configuration
- D. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
Answer: B
NEW QUESTION 18
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set cost 15.
- C. Set source 100.64.1.1.
- D. Set load-balance-mode source-ip-ip-based.
Answer: C
NEW QUESTION 19
Refer to exhibits.
Exhibit B.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic however inbound traffic is not being evaluated by the shaping policy Based on the exhibit, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic'?
- A. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- B. The guaranteed-10mbps option must be selected as the reverse shaper option.
- C. The guaranteed-10mbps option must be selected as the per-IP shaper option
- D. The reverse shaper option must be enabled and a traffic shaper must be selected
Answer: B
NEW QUESTION 20
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link sla-log
- B. diagnose sys virtual-wan-link log
- C. diagnose sys virtual-wan-link intf-sla-log
- D. diagnose sys virtual-wan-link health-check
Answer: A
NEW QUESTION 21
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on portl that match only FIRSTJVPN.
Which two configuration changes must be made to both IPsec
VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two )
- A. Use unique Diffie Hellman groups on each VPN interface
- B. Configure the IKE mode to be aggressive mode
- C. Use different proposals are used between the interfaces.
- D. Configure a unique peer ID for each dial-up VPN interface
Answer: B,D
NEW QUESTION 22
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- B. The guaranteed-10mbps option must be selected as the reverse shaper option.
- C. The guaranteed-10mbps option must be selected as the per-IP shaper option
- D. The reverse shaper option must be enabled and a traffic shaper must be selected
Answer: B
NEW QUESTION 23
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links One link has random jitter and latency issues and is based on a wireless connection Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD_WAN rules?
- A. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- B. Use the performance SLA targets to detect latency and jitter instantly.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Place the troublesome link at the top of the interface preference list.
- E. Choose the suitable interface based on the interface cost and weight.
Answer: A,B
NEW QUESTION 24
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two )
- A. All the existing sessions will continue to use port2 and new sessions will use port1
- B. All the existing sessions with no SNAT will start using port1 as the outgoing interface instead of port2
- C. All the existing sessions will be blocked from using port1 and port2
- D. All the existing sessions using SNAT will start using port1 as the outgoing interface instead of port2.
Answer: B,D
NEW QUESTION 25
Refer to exhibits.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The initial session of an application goes through a learning phase in order to apply the correct rule.
- B. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- C. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
- D. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.
Answer: B,C
NEW QUESTION 26
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- B. Firewall policy ID 1 has source NAT disabled.
- C. Changes have been made on firewall policy ID 1 on FortiGate.
- D. FortiGate has terminated the session after a change on policy ID 1.
Answer: A
NEW QUESTION 27
Refer to exhibits.
Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.
Based on the exhibits, which statement is correct?
- A. Both SD-WAN member interfaces have used separate SLA targets.
- B. Port1 became dead because no traffic was offload through the egress of port1.
- C. The SLA state of port1 is dead after five unanswered requests by the SLA servers.
- D. SD-WAN member interfaces are affected by the SLA state of the inactive interface.
Answer: C
NEW QUESTION 28
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two.)
- A. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- B. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- D. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
Answer: B,C
Explanation:
Explanation/Reference:
NEW QUESTION 29
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- B. The zero-touch provisioning process has completed internally, behind FortiGate.
- C. A factory reset performed on FortiGate.
- D. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- E. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
Answer: B,D
NEW QUESTION 30
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. An absolute SD-WAN rule was defined and matched traffic.
- B. Traffic has matched none of the FortiGate policy routes.
- C. The FIB lookup resolved interface was the SD-WAN interface.
- D. Matched traffic failed RPF and was caught by the rule.
Answer: B,C
NEW QUESTION 31
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- B. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- D. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
Answer: B,C
NEW QUESTION 32
Which statement is correct about the SD-WAN and ADVPN?
- A. Spoke support dynamic VPN as a static interface.
- B. ADVPN interface can be a member of SD-WAN interface.
- C. Dynamic VPN is not supported as an SD-Wan interface.
- D. Hub FortiGate is limited to use ADVPN as SD-WAN member interface.
Answer: B
NEW QUESTION 33
Which two statements describe how IPsec phase 1 main mode is different from aggressive mode when performing IKE negotiation? (Choose two )
- A. A total of six packets are exchanged between an initiator and a responder instead of three packets.
- B. The use of Diffie Hellman keys is limited by the responderand needs initiator acceptance
- C. XAuth is enabled as an additional level of authentication which requires a username and password
- D. A peer ID is included in the first packet from the initiator, along with suggested security policies
Answer: C
NEW QUESTION 34
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. FortiGate provides statistics and reading based on historical traffic logs.
- B. The debug output shows per-IP shaper values and real-time readings.
- C. This traffic shaper drops traffic that exceeds the set limits.
- D. Traffic being controlled by the traffic shaper is under 1 Kbps.
Answer: B,C
NEW QUESTION 35
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. ADVPN should only be enabled on unmanaged FortiGate devices.
- B. The protected subnets should be set to address object to all (0.0 .0. o/o).
- C. Each VPN device has a unique pre-shared key configured separately on phase one
- D. On the hub VPN, only the device needs additional phase one sett
Answer: C
NEW QUESTION 36
......
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Verified NSE7_SDW-6.4 Exam Dumps Q&As - Provide NSE7_SDW-6.4 with Correct Answers: https://www.realvalidexam.com/NSE7_SDW-6.4-real-exam-dumps.html
Pass Your NSE7_SDW-6.4 Dumps Free Latest Fortinet Practice Tests: https://drive.google.com/open?id=17TMXB7vhqqNoRABshTnMSDdlZ3wrgmK9
