[Dec 17, 2021] Pass Microsoft 365 MS-500 Exam With 231 Questions
Ultimate Guide to Prepare Free Microsoft MS-500 Exam Questions & Answer
NEW QUESTION 39
Which policies apply to which devices? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 40
You have a Microsoft 365 E5 subscription.
You implement Advanced Threat Protection (ATP) safe attachments policies for all users.
User reports that email messages containing attachments take longer than expected to be received.
You need to reduce the amount of time it takes to receive email messages that contain attachments. The
solution must ensure that all attachments are scanned for malware. Attachments that have malware must
be blocked.
What should you do from ATP?
- A. Add a condition
- B. Set the action to Dynamic Delivery
- C. Set the action to Block
- D. Add an exception
Answer: B
Explanation:
Explanation/Reference:
Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/dynamic-delivery-and-previewing
NEW QUESTION 41
You need to implement Windows Defender ATP to meet the security requirements. What should you do?
- A. Run WindowsDefenderATPOnboardingScript.cmd
- B. Configure port mirroring
- C. Create the ForceDefenderPassiveMode registry setting
- D. Download and install the Microsoft Monitoring Agent
Answer: D
Explanation:
Topic 1, Litware, Inc
Overview
Litware, Inc. is a financial company that has 1,000 users in its main office in Chicago and 100 users in a branch office in San Francisco.
Existing Environment
Internal Network Infrastructure
The network contains a single domain forest. The forest functional level is Windows Server 2016.
Users are subject to sign-in hour restrictions as defined in Active Directory.
The network has the IP address range shown in the following table.
The offices connect by using Multiprotocol Label Switching (MPLS).
The following operating systems are used on the network:
* Windows Server 2016
* Windows 10 Enterprise
* Windows 8.1 Enterprise
The internal network contains the systems shown in the following table.
Litware uses a third-party email system.
Cloud Infrastructure
Litware recently purchased Microsoft 365 subscription licenses for all users.
Microsoft Azure Active Directory (Azure AD) Connect is installed and uses the default authentication settings.
User accounts are not yet synced to Azure AD.
You have the Microsoft 365 users and groups shown in the following table.
Planned Changes
Litware plans to implement the following changes:
* Migrate the email system to Microsoft Exchange Online
* Implement Azure AD Privileged Identity Management
Security Requirements
Litware identities the following security requirements:
* Create a group named Group2 that will include all the Azure AD user accounts. Group2 will be used to provide limited access to Windows Analytics
* Create a group named Group3 that will be used to apply Azure Information Protection policies to pilot users. Group3 must only contain user accounts
* Use Azure Advanced Threat Protection (ATP) to detect any security threats that target the forest
* Prevent users locked out of Active Directory from signing in to Azure AD and Active Directory
* Implement a permanent eligible assignment of the Compliance administrator role for User1
* Integrate Windows Defender and Windows Defender ATP on domain-joined servers
* Prevent access to Azure resources for the guest user accounts by default
* Ensure that all domain-joined computers are registered to Azure AD
Multi-factor authentication (MFA) Requirements
Security features of Microsoft Office 365 and Azure will be tested by using pilot Azure user accounts.
You identify the following requirements for testing MFA.
* Pilot users must use MFA unless they are signing in from the internal network of the Chicago office.
MFA must NOT be used on the Chicago office internal network.
* If an authentication attempt is suspicious, MFA must be used, regardless of the user location
* Any disruption of legitimate authentication attempts must be minimized General Requirements Litware want to minimize the deployment of additional servers and services in the Active Directory forest.
NEW QUESTION 42
注：この質問は同じシナリオを提示する一連の質問の一部です。の各質問
シリーズは述べられた目的を満たすかもしれないユニークな解決策を含みます。いくつかの質問セット
他の人が正しい解決策を持っていないかもしれない間、複数の正しい解決策を持っています。
このセクションで質問に答えた後は、それに戻ることはできません。その結果、
質問はレビュー画面に表示されません。
Microsoft 365テナントがあります。 Microsoft AzureでCompanyConfidentialというラベルを作成します。
情報保護CompanyConfidentialをグローバルポリシーに追加します。
ユーザーはCompanyConfidentialを使用して電子メールメッセージを保護し、ラベルを複数の外部ユーザーに送信します。
受信者外部の受信者は、電子メールメッセージを開くことができないと報告しています。
外部の受信者が自分に送信された保護された電子メールメッセージを開くことができることを確認する必要があります。
解決方法：ラベルの暗号化設定を変更します。
これは目標を達成していますか？
- A. いいえ
- B. はい
Answer: A
NEW QUESTION 43
You have a Microsoft 365 tenant.
You create an attack surface reduction policy that uses an application control profile as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 44
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that a global administrator is notified when a document that contains U.S. Health Insurance Portability and Accountability Act (HIPAA) data is identified in your Microsoft 365 tenant.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
1. In the Security & Compliance Center > left navigation > Data loss prevention > Policy > + Create a policy.
2. Choose the U.S. Health Insurance Portability and Accountability Act (HIPAA) template > Next.
3. Name the policy > Next.
4. Choose All locations in Office 365 > Next.
5. At the first Policy Settings step just accept the defaults,
6. After clicking Next, you'll be presented with an additional Policy Settings page
* Deselect the Show policy tips to users and send them an email notification option.
* Select the Detect when content that's being shared contains option, and decrease the number of instances to 1.
* Select the Send incident reports in email option.
7. > Next
8. Select the option to turn on the policy right away > Next.
9. Click Create to finish creating the policy.
References:
https://docs.microsoft.com/en-us/microsoft-365/compliance/create-test-tune-dlp-policy?view=o365-worldwide
https://docs.microsoft.com/en-us/microsoft-365/compliance/data-loss-prevention-policies?view=o365-worldwide
https://docs.microsoft.com/en-us/microsoft-365/compliance/what-the-dlp-policy-templates-include?view=o365-w
NEW QUESTION 45
You have a Microsoft 365 subscription. All users use Microsoft Exchange Online.
Microsoft 365 is configured to use the default policy settings without any custom rules.
You manage message hygiene.
Where are suspicious email messages placed by default? To answer, drag the appropriate location to the correct message types. Each location may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
Explanation
NEW QUESTION 46
You have a Microsoft 365 E5 subscription that contains the users shown in the following table.
You plan to implement Azure Active Directory (Azure AD) Identity Protection.
You need to identify which users can perform the following actions:
* Configure a user risk policy.
* View the risky users report.
Which users should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/overview-identity-protection
NEW QUESTION 47
You have a Microsoft 365 subscription.
You are creating a retention policy named Retention1 as shown in the following exhibit.
You apply Retention1 to SharePoint sites and OneDrive accounts.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 48
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.
Four Windows 10 devices are joined to the tenant as shown in the following table.
On which devices can you use BitLocker To Go and on which devices can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 49
Your company plans to merge with another company.
A user named Debra Berger is an executive at your company.
You need to provide Debra Berger with all the email content of a user named Alex Wilber that contains the wordmerger.
To complete this task, sign in to the Microsoft 365 portal.
See explanation below.
Explanation
You need to run a content search then export the results of the search.
Go to the Microsoft 365 Compliance admin center.
Navigate toContent Search section inthe left navigation pane.
Click on+ New Searchto create a new search.
In the Keywords box, type in 'merger'.
In theLocationssection, selectSpecific locationsthen click theModifylink.
Click on theChoose users, groups or teamslink.
Type Alex Wilberin the search field the select his account from the search results.
Click theChoosebutton to add the user then clickDone.
ClickSaveto close the locations pane.
ClickSave & runto run the search.
The next step is to export the results. Select thesearch then under Export results to a computer, click Start export.
On the Export the search results page, under Output options,selectAll items.
Under Export Exchange content as,selectOne PST file for each mailbox.
Click onStart export.When the export has finished, there will be an option to download the exported PST file.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/content-search?view=o365-worldwide
https://docs.microsoft.com/en-us/microsoft-365/compliance/export-search-results?view=o365-worldwide QUESTIONNO: 166 You have a Microsoft 365 subscription and a Microsoft Defender Advanced Threat Protection (Microsoft Defender ATP) subscription.
You have devices enrolled in Microsoft Endpoint Manager as shown in the following table:
You integrateMicrosoft Defender ATP and Endpoint Manager.
You plan to evaluate the Microsoft Defender ATP risk level for the devices.
You need to identify which devices can be evaluated.
Which devices should you identify?
- A. Device1 only
- B. Device1 and Device2 only
- C. Device1 and Device3 only
- D. Device2 and Device3 only
Answer: A
Explanation:
Microsoft Defender ATP supports Windows 10, Windows Server, macOSX, and Linux D18912E1457D5D1DDCBD40AB3BF70D5D Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/evaluation-lab
https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/minimumrequirem
NEW QUESTION 50
You need to ensure that administrators can publish a label that adds a footer to email messages and documents.
To complete this task, sign in to the Microsoft Office 365 portal.
Answer:
Explanation:
See explanation below.
Explanation
You need to configure a Sensitivity label.
* Go to the Security & Compliance Admin Center.
* Navigate to Classification > Sensitivity labels.
* Click on + Create a label to create a new label.
* Give the label a name and description then click Next.
* Leave the Encryption option as None and click Next.
* On the Content Marking page, tick the checkbox Add a footer.
* Click the Customize Text link and add the footer text and click Save (for the question, it doesn't matter what text you add).
* Click Next.
* Leave the Auto-labeling for Office apps off and click
* Click the Submit button to save your changes.
* The label is now ready to be published. Click the button to exit the page and create the label.
NEW QUESTION 51
You have a Microsoft 365 subscription.
You need to be notified by email whenever an administrator starts an eDiscovery search.
What should you do from the Security & Compliance admin center?
- A. From Search & investigation, create a guided search.
- B. From Events, create an event.
- C. From Alerts, create an alert policy.
- D. From Search & investigation, create an eDiscovery case.
Answer: C
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/alert-policies
NEW QUESTION 52
You have a Microsoft 365 subscription that contains several Windows 10 devices. The devices are managed by using Microsoft Intune.
You need to enable Windows Defender Exploit Guard (Windows Defender EG) on the devices.
Which type of device configuration profile should you use?
- A. Device restrictions
- B. Endpoint protection
- C. Identity protection
- D. Windows Defender ATP
Answer: B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/intune/endpoint-protection-windows-10
NEW QUESTION 53
You have a Microsoft 365 subscription. Auditing is enabled.
A user named User1 is a member of a dynamic security group named Group1.
You discover that User1 is no longer a member of Group1.
You need to search the audit log to identify why User1 was removed from Group1.
Which two actions should you use in the search? To answer, select the appropriate activities in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/search-the-audit-log-in-security-and-compliance
NEW QUESTION 54
How should you configure Group3? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 55
You company has a Microsoft 36S E5 subscription and a hybrid Azure active Directory named contoso.com.
Contoso.com includes the following users:
You configure Password protection for Contoso.com as shown in the following exhibit.
Answer:
Explanation:
NEW QUESTION 56
You view Compliance Manager as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/meet-data-protection-and-regulatory-reqs-using-m
NEW QUESTION 57
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
You create and enforce an Azure AD Identity Protection sign-in risk policy that has the following settings:
* Assignments: Include Group1, Exclude Group2
* Conditions: Sign in risk of Low and above
* Access: Allow access, Require password multi-factor authentication
You need to identify how the policy affects User1 and User2.
What occurs when each user signs in from an anonymous IP address? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 58
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
You add internal as a blocked word in the group naming policy for contoso.com.
You add Contoso- as prefix in the group naming policy for contoso.com.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoft-365/solutions/groups-naming-policy?view=o365-worldwide
NEW QUESTION 59
You need to create Group3.
What are two possible ways to create the group?
- A. a security group in the Microsoft 365 admin center
- B. an Office 365 group in the Microsoft 365 admin center
- C. a distribution list in the Microsoft 365 admin center
- D. a security group in the Azure AD admin center
- E. a mail-enabled security group in the Microsoft 365 admin center
Answer: B,C
Explanation:
Explanation/Reference:
Implement and manage identity and access
Testlet 3
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Contoso, Ltd. is a consulting company that has a main office in Montreal and two branch offices in Seattle and New York.
The company has the offices shown in the following table.
Contoso has IT, human resources (HR), legal, marketing, and finance departments. Contoso uses Microsoft
365.
Existing Environment
Infrastructure
The network contains an Active Directory domain named contoso.com that is synced to a Microsoft Azure Active Directory (Azure AD) tenant. Password writeback is enabled.
The domain contains servers that run Windows Server 2016. The domain contains laptops and desktop computers that run Windows 10 Enterprise.
Each client computer has a single volume.
Each office connects to the Internet by using a NAT device. The offices have the IP addresses shown in the following table.
Named locations are defined in Azure AD as shown in the following table.
From the Multi-Factor Authentication page, an address space of 198.35.3.0/24 is defined in the trusted IPs list.
Azure Multi-Factor Authentication (MFA) is enabled for the users in the finance department.
The tenant contains the users shown in the following table.
The tenant contains the groups shown in the following table.
Customer Lockbox is enabled in Microsoft 365.
Microsoft Endpoint Manager Configuration
The devices enrolled in Microsoft Endpoint Manager are configured as shown in the following table.
The device compliance policies in Microsoft Endpoint Manager are configured as shown in the following table.
The device compliance policies have the assignments shown in the following table.
The Mark devices with no compliance policy assigned as setting is set to Compliant.
Requirements
Technical Requirements
Contoso identifies the following technical requirements:
* Use the principle of least privilege
* Enable User1 to assign the Reports reader role to users
* Ensure that User6 approves Customer Lockbox requests as quickly as possible
* Ensure that User9 can enable and configure Azure AD Privileged Identity Management
NEW QUESTION 60
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308
You need to create a retention policy that contains a data label. The policy must delete all Microsoft Office
365 content that is older than six months.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
Creating Office 356 labels is a two-step process. The first step is to create the actual label which includes the name, description, retention policy, and classifying the content as a record. Once this is completed, the second step requires the deployment of a label using a labelling policy which specifies the specific location to publish and applying the label automatically.
To create an Office 365 label, following these steps:
1. Open Security and Compliance Centre;
2. Click on Classifications;
3. Click on Labels;
4. The label will require configuration including: name your label (Name), add a description for the admins ( Description for Admins), add a description for the users (Description for Users);
5. Click Next once the configuration is completed;
6. Click Label Settings on the left-hand side menu;
7. The Label Settings will need to be configured. On this screen, you can toggle the Retention switch to either
"on" or "off". If you choose "on", then you can answer the question "When this label is applied to content" with one of two options. The first option is to . From the pick boxes, you can choose the length of retention and upon the end of the retention, the action that will take place. The three actions are to delete the data, trigger an approval flow for review, or nothing can be actioned. The second option is to not retain the data after a specified amount of time or based on the age of the data; and
8. The label has now been created.
To create a label policy, follow these steps:
1. Open Security and Compliance Centre
2. Click on Data Governance, Retention
3. Choose Label Policies box at the top of the screen; and
4. There are now two options. The first is to . If your organization wants its end users to apply the label manually, then this is the option you would choose. Note that this is location based. The second op tion is to Auto-apply Labels. With Auto-apply, you would have the ability to automatically apply a label when it meets the specified criteria.
References:
https://www.maadarani.com/office-365-classification-and-retention-labels/
NEW QUESTION 61
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that group owners renew their Office 365 groups every 180 days.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
Set group expiration
1. Open the Azure AD admin center with an account that is a global administrator in your Azure AD organization.
2. Select Groups, then select Expiration to open the expiration settings.
3. On the Expiration page, you can:
* Set the group lifetime in days. You could select one of the preset values, or a custom value (should be
31 days or more).
* Specify an email address where the renewal and expiration notifications should be sent when a group has no owner.
* Select which Office 365 groups expire. You can set expiration for:
* All Office 365 groups
* A list of Selected Office 365 groups
* None to restrict expiration for all groups
Save your settings when you're done by selecting Save.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/users-groups-roles/groups-lifecycle
NEW QUESTION 62
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308
You need to create an Azure Information Protection label to meet the following requirements:
* Content must expire after 21 days.
* Offline access must be allowed for 21 days only.
* Documents must be protected by using a cloud key.
* Authenticated users must be able to view content only.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
1. If you haven't already done so, open a new browser window and sign in to the Azure portal. Then navigate to the Azure Information Protection pane.
For example, in the search box for resources, services, and docs: Start typing Information and select Azure Information Protection.
2. From the Classifications > Labels menu option: On the Azure Information Protection - Labels pane, select the label you want to change.
On the Label pane, locate Set permissions for documents and emails containing this label, and select Protect.
3. Select Protection.
4. On the Protection pane, select Azure (cloud key).
5. Select Set permissions to define new protection settings in this portal.
6. If you selected Set permissions for Azure (cloud key), this option lets you select users and usage rights.
To specify the users that you want to be able to open protected documents and emails, select Add permissions.
Then on the Add permissions pane, select the first set of users and groups who will have rights to use the content that will be protected by the selected label:
* Choose Select from the list where you can then add all users from your organization by selecting Add
<organization name> - All members. This setting excludes guest accounts. Or, you can select Add any authenticated users, or browse the directory.
When you choose all members or browse the directory, the users or groups must have an email address. In a production environment, users and groups nearly always have an email address, but in a simple testing environment, you might need to add email addresses to user accounts or groups.
* Change the File Content Expiration setting to 21 days.
* Change the Allow offline access setting to 21 days.
When you have finished configuring the permissions and settings, click OK.
This grouping of settings creates a custom template for the Azure Rights Management service. These templates can be used with applications and services that integrate with Azure Rights Management.
7. Click OK to close the Protection pane and see your choice of User defined or your chosen template display for the Protection option in the Label pane.
8. On the Label pane, click Save.
9. On the Azure Information Protection pane, use the PROTECTION column to confirm that your label now displays the protection setting that you want:
* A check mark if you have configured protection.
* An x mark to denote cancellation if you have configured a label to remove protection.
* A blank field when protection is not set.
When you clicked Save, your changes are automatically available to users and services. There's no longer a separate publish option.
Reference:
https://docs.microsoft.com/en-us/azure/information-protection/configure-policy-protection
NEW QUESTION 63
You have a Microsoft 365 E5 subscription.
All computers run Windows 10 and are onboarded to Windows Defender Advanced Threat Protection (Windows Defender ATP).
You create a Windows Defender machine group named MachineGroupl.
You need to enable delegation for the security settings of the computers in MachineGroupl.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION 64
......
Skills measured
- Implement and manage threat protection (20-25%)
- The content of this exam was updated on July 26, 2021. Please download the exam skills outline below to see what changed.
- Manage governance and compliance features in Microsoft 365 (25-30%)
- Implement and manage information protection (15-20%)
- Implement and manage identity and access (30-35%)
Microsoft 365 Security Administration Practice Tests 2021 | Pass MS-500 with confidence!: https://drive.google.com/open?id=1W21NPgyeMbBdmnLFv4_cwqhm4bgbn7DB
Pass MS-500 Tests Engine pdf - All Free Dumps: https://www.realvalidexam.com/MS-500-real-exam-dumps.html
