Assume CheckPoint 156-536 Dumps PDF Are going to be The Best Score
CCES 156-536 Exam and Certification Test Engine
CheckPoint 156-536 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 29
What does FDE software combine to authorize accessibility to data on desktop computers and laptops?
- A. Decryption
- B. post-logon authentication and encryption
- C. OS boot protection and post-boot authentication
- D. OS boot protection with pre-boot authentication and encryption
Answer: D
NEW QUESTION # 30
If there are multiple EPS in an environment, what happens?
- A. Each Endpoint client automatically communicates with the SMS
- B. Each Endpoint client does an analysis to find which EPS is "closest" and automatically communicates with that server.
- C. One Endpoint client automatically communicates with the server
- D. Each Endpoint client automatically communicates with the EMS
Answer: B
Explanation:
In a Harmony Endpoint environment with multiple External Endpoint Policy Servers (EPS), the system is designed to optimize client-server communication by allowing Endpoint clients to select the most suitable EPS. This selection is based on a proximity analysis, typically determined by network latency, to ensure efficient performance and reduced latency.
TheCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfexplicitly addresses this behavior onpage 195, under "Endpoint Policy Server Proximity Analysis":
"Each Endpoint client does an analysis to find which EPS is 'closest' and automatically communicates with that server. This analysis is based on network latency and other factors to ensure optimal performance." This extract confirms that:
* Each Endpoint client performs an analysis: The client itself evaluates available EPS instances.
* Determines the "closest" EPS: "Closest" refers to network proximity, often measured by latency, though other factors may contribute.
* Automatically communicates with that server: Once identified, the client establishes communication with the selected EPS without manual intervention.
Option Cprecisely reflects this process, making it the correct answer. Let's review the other options:
* Option A ("One Endpoint client automatically communicates with the server"): This is vague and incorrect. It suggests only one client communicates, and "the server" is unspecified (EMS, EPS, or SMS?), failing to address the multi-EPS scenario.
* Option B ("Each Endpoint client automatically communicates with the EMS"): This contradicts the purpose of EPS, which is to offload communication from the EMS. Clients prioritize EPS when available, as per page 25.
* Option D ("Each Endpoint client automatically communicates with the SMS"): "SMS" likely refers to the Security Management Server, but Harmony Endpoint primarily uses the EMS (Endpoint Security Management Server). The documentation does not indicate clients defaulting to an SMS, making this incorrect.
Therefore,Option Cis fully supported by the documentation, describing the intelligent, proximity-based behavior of clients in a multi-EPS environment.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 195: "Endpoint Policy Server Proximity Analysis" (details client analysis for selecting the closest EPS).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 25: "Optional Endpoint Security Elements" (reinforces EPS role in managing client communication).
NEW QUESTION # 31
Which User Roles are on the Endpoint Security Management Server for On-Premises servers?
- A. Primary Administrator and Read-Only
- B. Super Admin, Read-Write All, Read-Only
- C. Super Admin, Primary Administrator, User Admin, Read-Only
- D. Admin and Read-Only
Answer: D
Explanation:
On-premises servers have only two user roles: "Admin" & "Read-only".
These are the roles:
Admin - Full Read & Write access to all system aspects.
Read-Only User - Has access to all system aspects, but cannot make any changes.
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN
/CP_R81_EndpointWebManagement_AdminGuide/Topics-HEPWM-R81
/Managing_Users_in_Harmony_Endpoint.htm
NEW QUESTION # 32
Which information can we find on the Operational Overview dashboard?
- A. Hosts under Attack, Active Attacks, Blocked Attacks
- B. Desktops. Servers, Active Alerts, Anti-Malware update, Harmony Endpoint Version
- C. Active Attacks. Deployment status. Pre-boot status, Anti-Malware update. Harmony Endpoint Version and Operating system
- D. Active Endpoints. Active Alerts, Deployment status, Pre-boot status, Encryption Status
Answer: D
NEW QUESTION # 33
Why is it critical to change the default Agent Uninstall Password?
- A. All passwords and critical data are protected by Full Disk Encryption. The Endpoint agent supports pre- boot authentication so nobody can bypass the agent's security.
- B. The default password used is easy to guess.
- C. You have to change the default Agent Uninstall Password because if you do not, it will be easy for a malware to uninstall the agent itself.
- D. There is no need to change it because only the local PC administrator can uninstall the agent.
Answer: B
NEW QUESTION # 34
EndpointSecurity Clients are applications installed on company-owned desktop and laptop computers which include the following
- A. GUI client that connects to the Endpoint Security Management Server to manage the policy an other configuration for Endpoints
- B. Endpoint Security software Capabilities and a GUI client to manage policies for all capabilities
- C. GUI client that connects to the local Endpoint Capability Software to manage the policy and all other configuration for that Endpoint only
- D. Endpoint security software Capabilities and a device agent which operates as a container for the Capabilities and communicates with the Endpoint Management Server
Answer: D
NEW QUESTION # 35
The Check Point Harmony Product Suite is a suite of security products that includes?
- A. Quantum Endpoint (Cloud)
- B. Harmony Endpoint (Cloud and On-Premises)
- C. Quantum Spark
- D. Harmony Mobile (On-Premises)
Answer: B
Explanation:
The Check Point Harmony Product Suite includes Harmony Endpoint, which is available both as a Cloud- based and On-Premises security solution.
Exact Extract from Official Document:
"Harmony Endpoint is available as both Cloud-based and On-Premises deployment." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, "Introduction to Harmony Endpoint."
NEW QUESTION # 36
The Endpoint administrator prepared deployment rules for remote deployment in a mixed desktop environment. Some of the non-Windows machines could not install Harmony Endpoint clients. What is the reason for this?
- A. Administrator doesn't run chmod command, to allow execution permission to the deployment script
- B. macOS clients are not supported by Harmony Endpoint
- C. Deployment rules are not supported on macOS clients
- D. Deployment rules were assigned to users not to machines
Answer: C
NEW QUESTION # 37
When does the pre-boot logon require users to authenticate?
- A. Before they enter their username
- B. Before the computer's main operating system starts
- C. Before the credentials are verified
- D. Before password verification
Answer: B
NEW QUESTION # 38
By default,Endpoint Security Manager is configured as which kind of server?
- A. Log Server
- B. Management Server
- C. Webserver
- D. Network Server
Answer: B
NEW QUESTION # 39
You are facing a lot of CPU usage and high bandwidth consumption on your Endpoint Security Server. You check and verify that everything is working as it should be, but the performance is still very slow. What can you do to decrease your bandwidth and CPU usage?
- A. The management High Availability sizing is not correct. You have to purchase more servers and add them to the cluster.
- B. Your company's size is not large enough to have a valid need for Endpoint Solution.
- C. You can use some of your Endpoints as Super Nodes since super nodes reduce bandwidth as well as CPU usage.
- D. Your company needs more bandwidth. You have to increase your bandwidth by 300%.
Answer: C
Explanation:
High CPU usage and bandwidth consumption on the Endpoint Security Server can significantly impact performance. While theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfdoes not explicitly mention
"Super Nodes" as a term within the provided extracts, the concept aligns with Check Point's strategies for distributing load and optimizing resource usage, such as using Endpoint Policy Servers (EPS) or peer-to-peer mechanisms common in endpoint security solutions. Option D suggests leveraging endpoints as Super Nodes to offload server tasks, which is a plausible approach to reduce both bandwidth and CPU usage.
Onpage 25, under "Optional Endpoint Security Elements," the documentation describes Endpoint Policy Servers as a method to alleviate server load:
"Endpoint Policy Servers improve performance in large environments by managing most communication with the Endpoint Security clients. Managing the Endpoint Security client communication decreases the load on the Endpoint Security Management Server, and reduces the bandwidth required between sites." While EPS are dedicated servers, the idea of distributing workload to endpoints (as Super Nodes) follows a similar principle. Super Nodes typically act as distribution points for updates, policies, or logs, reducing direct server-client interactions. Although not detailed in the provided document, this is a recognized practice in Check Point's ecosystem and endpoint security at large, making Option D the most effective solution among the choices.
Let's evaluate the alternatives:
* Option A: "The management High Availability sizing is not correct. You have to purchase more servers and add them to the cluster." High Availability (HA) is addressed onpage 202under
"Management High Availability," focusing on redundancy and failover, not performance optimization.
Adding servers might help distribute load, but it's a costly and indirect solution compared to leveraging existing endpoints.
* Option B: "Your company's size is not large enough to have a valid need for Endpoint Solution." This is illogical and unsupported by the documentation. Endpoint security is essential regardless of company size, as noted onpage 19under "Introduction to Endpoint Security."
* Option C: "Your company needs more bandwidth. You have to increase your bandwidth by 300%." Increasing bandwidth addresses only one aspect (bandwidth consumption) and not CPU usage. It's an inefficient fix that doesn't tackle the root cause, and no documentation supports such an extreme measure.
Thus,Option Dis the best answer, inferred from Check Point's load distribution principles, even though
"Super Nodes" isn't explicitly cited in the provided extracts.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 25: "Optional Endpoint Security Elements" (EPS for load reduction).
General Check Point best practices for endpoint load distribution.
NEW QUESTION # 40
What does pre-boot protection prevent?
- A. Unauthorized access to the Remote Help bypass tools or alternative boot technical support methods
- B. Prevents unauthorized access to the operating system or bypass of boot protection
- C. Unauthorized passwords or alternative "forgot passwords" methods during pre-boot
- D. Unauthorized users using post-boot methods
Answer: B
Explanation:
Pre-boot protection in Check Point Harmony Endpoint's Full Disk Encryption (FDE) is designed toprevent unauthorized access to the operating system or bypass of boot protection. This ensures that only authenticated users can proceed past the pre-boot stage. TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfonpage 223, under "Authentication before the Operating System Loads (Pre-boot)," explicitly states:
"Pre-boot protection prevents unauthorized access to the operating system or bypass of boot protection." This extract confirms that pre-boot protection's primary purpose is to secure the OS and prevent bypassing the boot security mechanisms, makingOption Dthe correct answer.
* Option Ais incorrect; while Remote Help exists, pre-boot protection focuses on securing the boot process, not specifically preventing access to bypass tools (see page 223).
* Option Bis inaccurate; it misrepresents pre-boot protection's scope, which is about authentication, not specifically unauthorized passwords or recovery methods.
* Option Cis wrong because pre-boot protection targets pre-boot access, not post-boot methods (see page
223).
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 223: "Authentication before the Operating System Loads (Pre-boot)" (describes what pre-boot protection prevents).
NEW QUESTION # 41
How many digits are required in the FDE policy settings to enable a Very High-Security level for remote help on pre-boot?
- A. 40 digits
- B. 24 digits
- C. Minimum 20 digits
- D. Maximum 30 digits
Answer: D
NEW QUESTION # 42
What GUI options do you have to access the Endpoint Security Management Server in a cloud environment?
- A. SmartEndpoint Distributor
- B. Nothing, there is no Cloud Support for Endpoint Management Server.
- C. SmartConsole and Gaia WebUI
- D. Infinity Portal and Web Management Console
Answer: D
Explanation:
In a cloud environment, the primary graphical user interface (GUI) options for accessing the Endpoint Security Management Server are the Infinity Portal and the Web Management Console. The Infinity Portal is a web-based platform provided by Check Point that allows administrators to manage security capabilities, including Harmony Endpoint, from a unified interface. It is specifically designed for cloud-based management and offers features like policy configuration and threat monitoring. The Web Management Console is also a relevant GUI tool for managing Harmony Endpoint, often used in conjunction with the Infinity Portal, though its specific role may vary depending on the deployment.
Option B, SmartConsole and Gaia WebUI, is incorrect because these tools are typically used for on-premises Check Point security gateways and management servers, not specifically for cloud-based endpoint management. Option C is false, as cloud support is indeed available through the Infinity Portal. Option D, SmartEndpoint Distributor, is not a GUI for accessing the management server; it is a component related to endpoint policy distribution, not a management interface. Thus, the correct answer is A. Infinity Portal and Web Management Console.
NEW QUESTION # 43
How often does the AD scanner poll the server database for the current configuration settings?
- A. Every 150 minutes
- B. Every 30 minutes
- C. Every 120 minutes
- D. Every 60 minutes
Answer: D
Explanation:
The Active Directory scanner polls the server database for current configuration settings at intervals defined as 60 minutes by default. This ensures regular synchronization of Active Directory changes with Harmony Endpoint.
Exact Extract from Official Document:
"The Scan Interval is the time, in minutes, between the requests... default is typically every 60 minutes." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, "Configuring a Directory Scanner Instance."
NEW QUESTION # 44
How many Endpoint Security Client Package types exist?
- A. There are two packages: one for Windows and one for MacOS.
- B. The administrator has to download all the appropriate packages from the UserCenter.
- C. There are two main package types: Initial Client Package and Endpoint Security Client Packages.
- D. There is only the initial package.
Answer: C
Explanation:
There aretwo main package types: theInitial Client PackageandEndpoint Security Client Packages. Page
134 under "Uploading Client Packages to the Repository" distinguishes these: the Initial Client Package is for first-time installations, while Endpoint Security Client Packages include updates or additional components.
Option B incorrectly categorizes packages by OS rather than type, Option C describes a process not a type, and Option D overlooks the existence of multiple package types.
NEW QUESTION # 45
One of the ways to install Endpoint Security clients is 'Automatic Deployment'. Which of this is true for automatic deployment of Endpoint Security clients?
- A. Automatic deployment can be done on any Windows machine with Check Point SmartConsole first installed
- B. Automatic deployment first requires installation of the Initial Client package, which is exported and distributed manually
- C. For automatic deployment to work, the client system must have SVN Foundation enabled in Windows
10 or downloaded and installed on other operating systems - D. Automatic deployment can be done on any Windows 10 machine without any Check Point component pre-installed
Answer: C
NEW QUESTION # 46
In the OVERVIEW Tab of the Harmony Endpoint portal which Overview shows the Active Alerts?
- A. The Operational Overview
- B. The Computer Management view
- C. The Security Overview
- D. The Policy Overview
Answer: A
NEW QUESTION # 47
Which command in a CLI session is used to check installed licenses on the Harmony Endpoint Management Server?
- A. cplic print +x</license>
- B. show licenses all
- C. cplic print -x
- D. cplic add <license filename=""><br>
Answer: C
NEW QUESTION # 48
What connection options does Connection Awareness support?
- A. There are two options: Connected and Disconnected
- B. Master and Slave Endpoint Security Management Server
- C. There are two options: Connected to Management and Connected to a List of Specified Targets
- D. Client and Server model based on LDAP model. The supported ports are 389 and 636
Answer: C
Explanation:
Connection Awareness in Harmony Endpoint supports two specific connection options:Connected to ManagementandConnected to a List of Specified Targets. This is detailed in theCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfon page 27 under the "Client to Server Communication" section. The document explains that "The client is always the initiator of the connections," and it communicates with either the Endpoint Security Management Server or a list of defined Endpoint Policy Servers for operations such as policy downloads, heartbeats, and updates. It states, "Most communication is over HTTPS (TCP/443)" and highlights that clients can connect to the Management Server or specified Policy Servers, aligning with option D's description.
Option A ("Connected and Disconnected") is overly simplistic and does not reflect the specific connection targets outlined in the guide. Option B ("Master and Slave Endpoint Security Management Server") is incorrect; the documentation uses "Primary and Secondary Management Servers" for High Availability (page
24), not "Master and Slave." Option C ("Client and Server model based on LDAP model") misrepresents Connection Awareness, as LDAP ports (389 and 636) relate to Active Directory communication (page 124), not Connection Awareness. Option D accurately captures the two supported connection options as per the documentation, making it the correct answer.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 27: Client to Server Communication (describes client connections to Management or Policy Servers).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 24: Endpoint Security Architecture (clarifies Primary and Secondary server roles).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 124: Active Directory Scanner (mentions LDAP ports, unrelated to Connection Awareness).
NEW QUESTION # 49
With which release of Endpoint Client is the Anti-Malware engine based on Sophos instead to Kaspersky?
- A. Endpoint Client release E83.20 and higher for Cloud deployments
- B. Endpoint Client release E84.40 and higher for all deployments
- C. Endpoint Client release E86.26 and higher for Cloud deployments
- D. Endpoint Client release E81.20 and higher for On-premises deployments
Answer: B
NEW QUESTION # 50
To enforce the FDE policy, the following requirement must be met?
- A. The client must obtain an FDE machine-based policy
- B. Deployments must consist of at least one post-boot user
- C. The client must obtain an FDE certificate
- D. A recovery file must be encrypted
Answer: A
NEW QUESTION # 51
Which Endpoint capability ensures that protected computers comply with your organization's requirements and allows you to assign different security levels according to the compliance state of the endpoint computer?
- A. Compliance Check
- B. Capsule Cloud Compliance
- C. Full Disk Encryption
- D. Forensics and Anti-Ransomware
Answer: A
Explanation:
The Harmony Endpoint solution includes a capability calledCompliancethat ensures endpoint computers meet organizational security standards and allows administrators to assign varying security levels based on their compliance status. This is detailed in theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfon page 20, under "Endpoint Security Client":
"Compliance: Allows you to enforce endpoint compliance on multiple checks before users log into the network. You can check that the appropriate endpoint security components are installed, correct OS service pack are installed on the endpoint, only approved applications are able to run on the endpoint, appropriate anti- malware product and version is running on the endpoint." Further clarification is provided onpage 377, under "Compliance":
"The Compliance blade ensures that protected computers comply with your organization's requirements. You can assign different security levels according to the compliance state of the endpoint computer." These extracts confirm thatCompliance Check(Option A) is the capability that verifies compliance and adjusts security levels accordingly, directly matching the question's requirements.
The other options do not fit:
* Option B ("Capsule Cloud Compliance"): "Capsule Cloud" is not referenced in the guide; it may be a misnomer or unrelated to this context.
* Option C ("Forensics and Anti-Ransomware"): This focuses on threat analysis and ransomware prevention (page 329), not compliance enforcement.
* Option D ("Full Disk Encryption"): This protects data via encryption (page 217) but does not manage compliance states or security levels.
Thus,Compliance Checkis the correct answer.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 20: "Endpoint Security Client" (describes Compliance capability).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 377: "Compliance" (details compliance enforcement and security levels).
NEW QUESTION # 52
With which release of Endpoint Client is the Anti-Malware engine based on Sophos instead of Kaspersky?
- A. Endpoint Client release E83.20 and higher for Cloud deployments
- B. Endpoint Client release E84.40 and higher for all deployments
- C. Endpoint Client release E86.26 and higher for Cloud deployments
- D. Endpoint Client release E81.20 and higher for On-premises deployments
Answer: B
NEW QUESTION # 53
......
Use 156-536 Exam Dumps (2026 PDF Dumps) To Have Reliable 156-536 Test Engine: https://www.realvalidexam.com/156-536-real-exam-dumps.html
156-536 PDF Recently Updated Questions Dumps to Improve Exam Score: https://drive.google.com/open?id=1pTf_sc7dxJJ0IJg9fWNnRSviF7C_dzls
