2021 Valid C-IBP-2105 Exam Updates - 2021 Study Guide
C-IBP-2105 Certification - The Ultimate Guide [Updated 2021]
SAP C-IBP-2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
NEW QUESTION 22
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- C. Activate Local Member Recognition is selected.
- D. A key figure is created in the Planning Area app.
Answer: C
NEW QUESTION 23
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. If a realignment step fails, subsequent steps are not processed.
- B. The number of steps in realignment run is limited to 255.
- C. The name of the realignment step should be no longer than 20 characters.
- D. The realignment step status must be set to Approved for it to be executed.
Answer: A,D
NEW QUESTION 24
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?
- A. IF("PERIODID3" ="$$PERIODID3CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID5" ="$$PERIODID5CU$$...)
Answer: B
NEW QUESTION 25
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Loc-Prod Subst Valid-From Date
- B. Flag 'Disable Substitution of Location Products'
- C. Promotion duration
- D. Location Product Sub Cost Rate
Answer: A,C
NEW QUESTION 26
What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Specify a planning horizon in the planning area for each level of the assigned time profile.
- C. Configure at least one calculated key figure for the planning area.
- D. Assign the compound master data type and its component master data types.
Answer: B,D
NEW QUESTION 27
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Units of measure are usually not time-independent.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Analytics provide the user with the option to select the target unit of measure.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,C,D
NEW QUESTION 28
Which features apply to quota violations modeled with the optimizer?
- A. Min and Max Quotas have to be the same as sourcing ratios.
- B. Quota violation cost is maintained as an attribute as a key figure.
- C. Quotas can be modeled for sourcing location, production, and consensus demand.
- D. Quotas require sourcing ratios to be maintained.
Answer: D
NEW QUESTION 29
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for sales and operations
- B. DDMRP
- C. SAP IBP for demand
- D. SAP IBP for response and supply
Answer: A,D
NEW QUESTION 30
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Disaggregation according to a user-defined expression
- B. An internal system-generated disaggregation
- C. Disaggregation in batch triggered by an application job
- D. Proportional disaggregation by using KF2 in the expression
- E. Disaggregation according to an equal split
Answer: A,D,E
NEW QUESTION 31
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Enough demands can be pulled forward and pull production will occur.
- B. Capacity leveling will be possible for production and storage resources.
- C. Excess stock can be generated and will need to be staged in an overflow warehouse.
- D. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
Answer: A,D
NEW QUESTION 32
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Purge Non-Conforming Data
- B. Create Time Periods for Time Profiles
- C. Purge Key Figure Data
- D. Purge Master Data
Answer: C,D
NEW QUESTION 33
SAP is transitioning IBP customers to the new process of export/import. What are some of the features of this new process? Note: There are 2 correct Answers to this question.
- A. You can move a transported item from one collection to another.
- B. You can export from a planning area that is on a different release.
- C. You can choose to import only some of the items that were exported.
- D. You can create a collection of items and export it.
Answer: A,B
NEW QUESTION 34
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.
- A. It is mandatory to load historical lag-based snapshot data.
- B. Set up the forecast model to be executed at product-location level.
- C. At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.
- D. The result generates sensed demand data at the monthly time granularity for the full time horizon.
Answer: A,C
NEW QUESTION 35
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?
- A. Production source validity at the start of seasonal peak
- B. Incremental production values
- C. Capacity expansion with additional costs
- D. Adjusted production interactive values
Answer: C
NEW QUESTION 36
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Both periods and profiles are identified by an integer.
- B. Periods are identified by an integer and profiles by an alphanumeric prefix.
- C. Periods are identified by a start and end date and profiles by an integer.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: C
NEW QUESTION 37
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.
- A. Use a subnetwork ID to reduce the size of the problem.
- B. Avoid using telescopic time buckets.
- C. Increase the use of incremental lot size beyond the frozen horizon.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: A,B
NEW QUESTION 38
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Analyze forecast accuracy by product class.
- B. Assign more appropriate inventory algorithms to planning objects.
- C. Identify inventory items that require closer attention.
- D. Tailor your forecast strategy and inventory optimization to segment characteristics.
Answer: A,D
NEW QUESTION 39
......
C-IBP-2105 Practice Exam and Study Guides - Verified By RealValidExam: https://www.realvalidexam.com/C-IBP-2105-real-exam-dumps.html
