100% Free Real Updated EX200 Questions & Answers Pass Your Exam Easily
Easily To Pass New EX200 Verified & Correct Answers
NEW QUESTION # 44
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /dat a. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.
Answer:
Explanation:
Create a partition having size 5 GB and change the syste id '8e'.
use partprobe command
pvcreate /dev/hda9 Suppose your partition number is hda9.
vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
lvextend -L+5120M /dev/test0/lvtestvolume
verify using lvdisplay /dev/test0/lvtestvolume.
NEW QUESTION # 45
SIMULATION
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart
2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
ifdown eth0
ifup eth0
NEW QUESTION # 46
Binding to an external validation server.
System server.domain11.example.com provides a LDAP validation service, your system should bind to this service as required:
Base DN of validation service is dc=example,dc=com
LDAP is used for providing account information and validation information Connecting and using the certification of http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to encrypt After the correct configuration, ldapuser1 can log into your system, it does not have HOME directory until you finish autofs questions, ldapuser1 password is password.
Answer:
Explanation:
yum -y install sssd authconfig-gtk krb5-workstation authconfig-gtk // open the graphical interface Modify user account database to ldap, fill up DN and LDAP SERVER as questions required, use TLS to encrypt connections making tick, write http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to download ca, authentication method choose ldap password.
You can test if the ldapuser is added by the following command:
Id ldapuser1
Note: user password doesn't not need to set
NEW QUESTION # 47
Configure NTP.
Configure NTP service, Synchronize the server time, NTP server: classroom.example.com
Answer:
Explanation:
see explanation below.
Explanation
Configure the client:
Yum -y install chrony
Vim /etc/chrony.conf
Add: server classroom.example.com iburst
Start: systemctl enable chronyd
systemctl restart chronyd
Validate: timedatectl status
NEW QUESTION # 48
According the following requirements, configure autofs service and automatically mount to user's home directory in the ldap domain.
- Instructor.example.com (192.168.0.254) has shared /home/guests/ldapuserX home directory to your system by over NFS export, X is your hostname number.
- LdapuserX's home directory is exist in the instructor.example.com: /home/ guests/ldapuserX
- LdapuserX's home directory must be able to automatically mount to /home/ guests/ldapuserX in your system.
- Home directory have write permissions for the corresponding user.
However, you can log on to the ldapuser1 - ldapuser99 users after verification. But you can only get your corresponding ldapuser users. If your system's hostname is server1.example.com, you can only get ldapuser1's home directory.
Answer:
Explanation:
see explanation below.
Explanation
mkdir -p /home/guests
cat /etc/auto.master:
/home/guests /etc/auto.ldap
cat /etc/auto.ldap:
ldapuser1 -rw instructor.example.com:/home/guests/ldapuser1
* automatically mount all the user's home directory #* -rw instructor.example.com:/home/guests/&
NEW QUESTION # 49
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB. Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing any data. As well as size should be increased online.
Answer:
Explanation:
see explanation below.
Explanation
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a file system such as /home and /var on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.
* Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
* Verify the Size on mounted directory: df -h or df -h mounted directory name
* Use: lvextend -L+400M /dev/vg0/lv1
* ext2online -d /dev/vg0/lv1 to bring extended size online.
* Again Verify using lvdisplay and df -h command.
NEW QUESTION # 50
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.
Answer:
Explanation:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and the extended partition is further divided into logical partitions) Enter
+2G t
8 I
82
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NEW QUESTION # 51
Create one partitions having size 100MB and mount it on data.
Answer:
Explanation:
1. Use fdisk /dev/hda to create new partition.
2. Type n For New partitions.
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
mke2fs -j /dev/hda? To create ext3 filesystem.
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Verify by mounting on current Sessions also: mount /dev/hda? /data
NEW QUESTION # 52
Make on data that only the user owner and group owner member can fully access.
Answer:
Explanation:
see explanation below.
Explanation
* chmod 770 /data
* Verify using : ls -ld /data Preview should be like:
drwxrwx--- 2 root sysadmin 4096 Mar 16 18:08 /data
To change the permission on directory we use the chmod command.
According to the question that only the owner user (root) and group member (sysadmin) can fully access the directory so: chmod 770 /data
NEW QUESTION # 53
The firewall must be open.
Answer:
Explanation:
see explanation below.
Explanation
/etc/init.d/iptables start
iptables -F
iptables -X
iptables -Z
/etc/init.d/iptables save
chkconfig iptables on
NEW QUESTION # 54
Configure the permissions of /var/tmp/fstab
Copy the file /etc/fstab to /var/tmp/fstab. Configure the permissions of /var/tmp/fstab so that:
the file /var/tmp/fstab is owned by the root user.
the file /var/tmp/fstab belongs to the group root.
the file /var/tmp/fstab should not be executable by anyone.
the user natasha is able to read and write /var/tmp/fstab.
the user harry can neither write nor read /var/tmp/fstab.
all other users (current or future) have the ability to read /var/tmp/fstab.
Answer:
Explanation:
cp -a /etc/fstab /var/tmp
cd /var/tmp
ls -l
getfacl /var/tmp/fstab
chmod ugo-x /var/tmp/fstab
[ No need to do this, there won't be execute permission for the file by default]
# setfacl -m u:natasha:rw /var/tmp/fstab # setfacl -m u:harry:0 /var/tmp/fstab(zero)
[Read permission will be there for all the users, by default. Check it using ls -l /var/tmp/fstab] Verify by
[ ls -la /var/tmp/fstab]
NEW QUESTION # 55
SIMULATION
Create a logical volume
Create a new logical volume as required:
Name the logical volume as database, belongs to datastore of the volume group, size is 50 PE.
Expansion size of each volume in volume group datastore is 16MB.
Use ext3 to format this new logical volume, this logical volume should automatically mount to /mnt/ database
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: fdisk -cu /dev/vda// Create a 1G partition, modified when needed partx -a /dev/vda pvcreate /dev/vdax vgcreate datastore /dev/vdax -s 16M lvcreate- l 50 -n database datastore mkfs.ext3 /dev/datastore/database mkdir /mnt/database mount /dev/datastore/database /mnt/database/ df -Th vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
Restart and check all the questions requirements.
NEW QUESTION # 56
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any data. The size of logical volume 200MB to 210MB will be acceptable.
Answer:
Explanation:
see explanation below.
Explanation
* First check the size of Logical Volume: lvdisplay /dev/vo/myvol
* Make sure that the filesystem is in a consistent state before reducing:
# fsck -f /dev/vo/myvol
* Now reduce the filesystem by 200MB.
# resize2fs /dev/vo/myvol 200M
* It is now possible to reduce the logical volume. #lvreduce /dev/vo/myvol -L 200M
* Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
* Verify that the size comes in online or not: df -h
NEW QUESTION # 57
SIMULATION
Update the kernel from ftp://instructor.example.com/pub/updates.
According the following requirements:
The updated kernel must exist as default kernel after rebooting the system.
The original kernel still exists and is available in the system.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: rpm -ivh kernel-firm...
rpm -ivh kernel...
NEW QUESTION # 58
Configure NTP.
Configure NTP service, Synchronize the server time, NTP server: classroom.example.com
Answer:
Explanation:
Configure the client:
Yum -y install chrony
Vim /etc/chrony.conf
Add: server classroom.example.com iburst
Start: systemctl enable chronyd
systemctl restart chronyd
Validate: timedatectl status
NEW QUESTION # 59
Part 1 (on Node1 Server)
Task 1 [Managing Networking]
Please create new network connection with existing interface (enp1s0) using provided values:
IPv4: 172.25.X.10/255.255.255.0 (where X is your domain number: Domain15) Gateway: 172.25.X.2 DNS server: 172.25.X.2 Add the following secondary IP addresses statically to your current running connection. Do this in a way that does not compromise your existing settings:
IPv4: 10.0.0.5/24 and set the hostname node1.domain15.example.com
Answer:
Explanation:
* [root@node1 ~]# nmcli connection show
[root@node1 ~]# nmcli connection add con-name static ifname enp1s0 type ethernet ipv4.addresses 172.25.15.10/24 ipv4.gateway 172.25.15.2 ipv4.dns 172.25.15.2
[root@node1 ~]# nmcli connection modify static ipv4.method manual connection.autoconnect yes
[root@node1 ~]# nmcli connection modify static +ipv4.addresses 10.0.0.5/24
[root@node1 ~]# nmcli connection up static
[root@node1 ~]# nmcli connection show
[root@node1 ~]# hostnamectl set-hostname node1.domain15.example.com
[root@node1 ~]# hostnamectl status
[root@node1 ~]# nmcli connection down static
* [root@node1 ~]# nmcli connection up static
[root@node1 ~]# ip addr show
[root@node1 ~]# reboot
### For checking ###
[root@node1 ~]# ip addr show
[root@node1 ~]# netstat -nr
[root@node1 ~]# cat /etc/resolv.conf
NEW QUESTION # 60
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11 Password: password
Answer:
Explanation:
see explanation below.
Explanation
* system-config-authentication LDAP user DN=dc=domain11,dc=example,dc=com Server= host.domain11.example.com Certificate
http://host.domain11.example.com/pub/domain11.crt (enter url carefully, there maybe // or ..) LDAP password OK starting sssd
* su -ldapuser11 Display Bash prompt #exit
NEW QUESTION # 61
Configure your NFS services. Share the directory by the NFS Shared services.
Answer:
Explanation:
see explanation below.
Explanation
/etc/init.d/rpcbind start
/etc/init.d/nfslock start
/etc/init.d/nfs start
chkconfig rpcbind on
chkconfig nfslock on
chkconfig nfs on
showmount -e localhost
NEW QUESTION # 62
Add admin group and set gid=600
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# groupadd -g 600 admin
NEW QUESTION # 63
......
Certification Path of Red Hat EX200 Exam
- Obtain the Red Hat Certified Engineer (EX200) certification for Red Hat Enterprise Linux 6 or 7.
- Obtain minimum Red Hat Certified System Administrator (RHCSA) certification for RHEL 6 or RHEL 7.
- Obtain the complete Expert designation.
Subjects covered in this exam include:
- Describe the difference between physical and logical networks.
- Define wireless protocols and their associated security considerations.
- Describe various scenarios for remote connectivity, including common configurations and network architecture.
Free EX200 Exam Files Downloaded Instantly: https://www.realvalidexam.com/EX200-real-exam-dumps.html
Verified & Latest EX200 Dump Q&As with Correct Answers: https://drive.google.com/open?id=1sw7yBuw98dy0IcvJuQ7UxO95oQIwcU7K
